Heath equipment, parts, and manuals FS

[Ken Simpson, W8EK]

Heath items for sale:

Microphone for Heath "Lunchbox" Series
This is the ORIGINAL microphone for the Twoer, Sixer, 
and others of the "Lunch Box" series.
It is the original Turner microphone, with the Turner name 
on the front, cotton covered cord, and single button 
microphone connector.
It is in extremely nice shape. No problems with the cord or 
connector, and the mic itself even has a bit of the original 
"sheen" left on it. It works fine.  $33 

Heath HM-15 SWR Bridge
This unit matches the Heath SB (and also HW) line in styling.
It is an SWR Bridge that covers from 160 thru 6 meters, with 
SO-239 connectors on the back. The front has the meter on 
the left, and two knobs to the right. It is the same size as the 
HD-15 phone patch. This one is in very nice shape. 
Paper work included for $20.

High Impedance Heath Hand Microphone
This is a mic that came with Heath gear, and says Heath on it.  
It is Hi Z, and has the 2 pin Amphenol connector on it, as 
used by much of the older Heath gear.  Of course it can also 
be used on Johnson, Hallicrafters, and other transmitters 
needing a Hi Z mic.
It works fine, and is in good shape.  $30

Heath QF-1 "Q multiplier"
This unit attaches to a receiver to improve selectivity. The 
styling matches the DX-60 / HR-10 rigs and others of that era.
There are a few scratches on the case.  $10


Heath Parts:

Main Cabinet for HM-2102 VHF Wattmeter
This is the darker green front panel and bottom, and mounting 
ears.  It includes the silk screen markings on the front.  It is in 
good shape, with one small spot missing the paint on the 
bottom, in a location that will not show.  $8

Crystal for 12.545 MHz - Heath Part # 404-302
Used in Hetrodyne oscillator in HW and SB line rigs.
Still in its original box.  $10

I have many SB-630 parts as well.  Most of the chassis 
parts are available, but no clock.  Front panel and outer 
case are gone, but reflectometer assembly, transformer, 
switches, etc. are still available.
Please let me know what you need.

Parts from SB-400 xmtr (likely will also work with SB-401)
meter switch  - $5
Mic/CW level control (dual pot)  - $ 7
Pilot bulb mounting hardware, w/#47 bulb - $2

Chrome Bezel from around Heath HW-202 or HW-2036 
two meter transceiver.  Front panel bezel.  $5

Expanded Scale AC Voltmeter 
This is an AC Voltmeter with an expanded scale. It reads 
from 0 to 150 volts AC, but the scale is expanded so that 
one can read in the 120 V area easier. The middle of the 
scale is about 95 volts. It is ideal to have in line constantly, 
to check your line voltage. This is a Weston Model 476, 
and is about 2 1/2 inches in diameter, with 3 mounting holes.
Of course it works fine, and looks fine also. $18


ORIGINAL Heath manuals. These are the manuals
only. They are all originals, and not copies, and all 
are close to new condition.

Heath HM-2102 VHF Wattmeter Assembly Manual
1972 - Looks very close to new, but does have check 
marks in the book.  Schematic included.  $10

Heath HW-2021 Assembly manual - 1975
For 2 meter hand held transceiver
No check marks in book. $10

Heath HN-31 A "Cantenna" Dummy Load
This is the "A" model dated 1982
No check marks in book. $10

GD-600 Photoelectric Light Switch
Very nice condition. Schematic is
part of book. $6

Heath  IM-5284 Multimeter
Large schematic only - $ 3

These are original manuals only.


Prices do not include shipping from Florida.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK at speakeasy.net or W8EK at arrl.net
Voice Phone  (352) 732-8400

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html