Heath HO 10 Monitor Scope

[John King]

Have replaced bad 3RP1 cathode tube in my HO 10 and
tested all other tubes. Have changed the two
.15 at 1600VDC capacitors.

It is working however not up to PAR. All controls
work. The current problem is that when in the
trapezoid pattern monitoring AM transmitted signal,
the horizontal width of the trapezoid doesn't
completely fill out to a symetrical point. The
horizontal position and horizontal gain pots work
except that there doesn't seem to be enough horizontal
gain to cause the trapezoid to fully display the full
signal.

I have a properly working SB 610 that shows clearly my
transmitted AM signal. The HO 10 doesn't fill out the
trapezoid symetrically to a point.

I suspect a resistor in the horizontal gain circuit
having changed value or maybe a suspect capacitor. Are
there any commonly known culprits that cause this loss
of horizontal gain? Naturally, I am lazy by nature,
and would rather "pick your brains" than use my feeble
brain. What are your thoughts based on your vast
knowledge and EXPERIENCE??? Thanks and 73, John, K5PGW




      ____________________________________________________________________________________
Looking for last minute shopping deals?  
Find them fast with Yahoo! Search.  http://tools.search.yahoo.com/newsearch/category.php?category=shopping

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html