Heathkit SB-200 - no output

[RAY FRIESS]

Make sure the contacts on the relay are clean and making contact.  That can affect things.
> Date: Sun, 20 Jan 2008 14:19:19 -0600> From: tlbuch at SCRTC.COM> Subject: Heathkit SB-200 - no output> To: HEATH at LISTSERV.TEMPE.GOV> > Hi,> > > > I am working on my first SB-200 amplifier project. I brought the amp up> slowly on a variac to 120 volts. During tune up I observed the following:> 2500 HV & SWR metering works. I tested it with a solid state rig and also a> Heathkit HW-100 with the same results. There is no idling, grid or plate> current and adjustment of the load and tune controls has no effect on> output. Increasing the drive from either rig doesn't affect the amplifier> either. Anyone had a similar experience or ideas?> > > > From Harbach Electronics I installed a fan, a soft start module and a couple> of paper caps were replaced with modern electrolytics. There was an existing> soft key interface from Harbach in the amp and upon review the circuit> appeared to be installed correctly. > > > > 73,> > > > Tom> > KG4KGY > > > -----------------------------------------------------------> Products bought, sold or traded here is the responsibility of the> parties involved. This list and the City of Tempe are not responsible> for losses or misrepresentations of any kind. Buyer beware!> > -----------------------------------------------------------> This list is a public service of the City of Tempe, Arizona> -----------------------------------------------------------> > Subscription control - http://www.tempe.gov/lists/control.aspx?list=HEATH> To post - HEATH at LISTSERV.TEMPE.GOV> Archives - http://listserv.tempe.gov/archives/HEATH.html
-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html