HP-23C schematic??

Garey Barrell k4oah at MINDSPRING.COM
Thu Apr 30 12:36:41 EDT 2009


Bob Burns wrote:
>  
>  
> In a message dated 30/04/2009 13:51:53 GMT Standard Time, ac1y at NC.RR.COM  
> writes:
>
>
> Basically, someone detached the Fil Common wire and left it  floating (taped
> off) inside the chassis. I'd rather presume that this  should be grounded,
> right??
>
>
>
>
> Hi Sandy
>  
>
> Wrong! None of the filament connections are grounded in the power supply,  
> only in the destination transceiver, in order to avoid hum loops in the  
> interconnecting cables.
>  
>
> On the assumption that all of the HP23x units have basically the same  
> connections, the HP23A has the filament centre tap connected to pin 8 of the 11  
> way socket and labelled 6v FIL. As far as I can see, if a function is 
> missing  then that pin is left disconnected.
>  
> I too have an incomplete HP23C manual, missing its circuit diagram.
>  
> 73
>
> Bob 
>
> G3OOU
> G-QRP  6907
> _www.g3oou.co.uk_ (http://www.g3oou.co.uk/) 
>   



The HP-23C filament wiring is 12.6 VAC only.  The Yellow wire goes to 
Pin 2 of the connector, and Green/Yellow goes to Pin 6.

73, Garey - K4OAH
Glen Allen, VA

Drake 2-B, 4-B, C-Line & TR-4/C Service Supplement CDs
<www.k4oah.com>

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=HEATH
To post - HEATH at LISTS.TEMPE.GOV
Archives - http://lists.tempe.gov/archives/HEATH.html




More information about the Heath mailing list