Has anyone come up with a way to trouble shoot HR-1680 bds?

Bob Hardie- W5UQ W5UQ at VERIZON.NET
Tue Jul 7 07:08:55 EDT 2009


If the extender board is the same as the one for the SB104(A), then I 
have one for sale.  If it is not, then it's still for sale for the 
SB104(A).  I need $75 to break even on it.  Sold the 104A last year.
Bob W5UQ

Mike Bryce wrote:
> bob and the gang
>
> I feel that the 1680 is one of the better receivers heathkit ever came 
> out with. it looks good and even on todays bands, it can hold its own
>
> as for the extender boards, yes, the connectors are just not out 
> there. the pins are .093 molex, but I can't for the life of me find 
> the sockets that I can make a new pcb work
>
> so, to that end, i use micro grabber connectors that allow me to hook 
> onto a test point and still have the pcb down into the radio.
>
> slow...sure is, but it is workable.
>
> I've also soldered small wires (resistor lead cutoffs) to various test 
> points and used small clip leads to connect to.
>
> mike
>
> Mike, WB8VGE
> SunLight Energy Systems
> The Heathkit Shop
> http://www.theheathkitshop.com/
> J e e p
> o|||||||o
> Note: No trees were killed in the sending of this message, but a large 
> number of electrons were terribly inconvenienced
>
>
>
>
> On Jul 6, 2009, at 10:45 AM, Robert Groh wrote:
>
> As those of you who own HR-1680's know, trouble shooting the pc board 
> assemblies (pwbs) without an extender is a bit of a challenge.  And, 
> seemingly, the connectors needed to build an extender board are (as 
> are the extender boards) 'unobtainium'.  Before I spend anytime trying 
> to come up with a way to overcome this obstacle, I thought I would 
> throw an inquiry out there to see if anyone else has any ideas to share.
>
> 73
> Bob, WA2CKY
>
> -----------------------------------------------------------
> Products bought, sold or traded here is the responsibility of the
> parties involved.  This list and the City of Tempe are not responsible
> for losses or misrepresentations of any kind.  Buyer beware!
>
> -----------------------------------------------------------
> This list is a public service of the City of Tempe, Arizona
> -----------------------------------------------------------
>
> Subscription control - http://www.tempe.gov/lists/control.aspx?list=HEATH
> To post - HEATH at LISTS.TEMPE.GOV
> Archives - http://lists.tempe.gov/archives/HEATH.html
>
> __________ NOD32 4219 (20090705) Information __________
>
> This message was checked by NOD32 antivirus system.
> http://www.eset.com
>
>
>

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=HEATH
To post - HEATH at LISTS.TEMPE.GOV
Archives - http://lists.tempe.gov/archives/HEATH.html




More information about the Heath mailing list