HW-101

[Kenneth G. Gordon]

On 1 Mar 2009 at 9:59, George Babits wrote:

> Hi Gang,
> 
> I'm checking out an HW-101 I picked up yesterday.  I didn't get a
> manual with it (bummer).  The HP-23A has a High (300 volt) and Low
> (250 volt) switch.  Can someone tell me which position I should be
> using with the HW-101.  I get a good more output in the High position,
> but the rig "smells" hot.

George:

For the HW-101 and SB-101 series, you have to use the 
HIGH position of that switch, 300 VDC.

The LOW position, or 250 VDC, is used for the HW-
12/22/32 series.

Ken Gordon W7EKB

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=HEATH
To post - HEATH at LISTS.TEMPE.GOV
Archives - http://lists.tempe.gov/archives/HEATH.html