SB310 problems

[Mark Johnson]

Start by checking the HFO adjustments for those bands. Consult the alignment 
procedure in the manual.

Mark V Johnson VE3DJU/VE3DDI
----- Original Message ----- 
From: "ddswl" <ddswl at CENTURYTEL.NET>
To: <HEATH at LISTS.TEMPE.GOV>
Sent: Friday, October 16, 2009 4:50 PM
Subject: [HEATH-TEMPE] SB310 problems


>I have an SB310 receiver with two dead bands (3.5--26.9). I checking 
>voltages when the probe touches pin 1 (grid) of the RF, ALL bands come to 
>life & work FB with an 18 inch clip lead to the grid.
> Resoldered all RF tube and band switch points, checked caps & res & 
> checked wiring, all is correct and so are voltages.  What next?? Any 
> ideas?? Tnx--Doug W7LNB
> ddswl at centurytel.net
> -----------------------------------------------------------
> Products bought, sold or traded here is the responsibility of the
> parties involved.  This list and the City of Tempe are not responsible
> for losses or misrepresentations of any kind.  Buyer beware!
>
> -----------------------------------------------------------
> This list is a public service of the City of Tempe, Arizona
> -----------------------------------------------------------
>
> Subscription control - http://www.tempe.gov/lists/control.aspx?list=HEATH
> To post - HEATH at LISTS.TEMPE.GOV
> Archives - http://lists.tempe.gov/archives/HEATH.html
> 

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=HEATH
To post - HEATH at LISTS.TEMPE.GOV
Archives - http://lists.tempe.gov/archives/HEATH.html