SB-401 SB-303 Transceive

[Jim Schnurr]

All:

I am hoping that someone can shed some light on a problem I have with the SB-401 and SB-303 combination. The rigs work fine as seperate units but in transceive I get audio feedback through the speaker. It will disappear when the mike is disconnected or mic gain is turned down. The transmitter can be in transceive or even stanby with the same problem.occurring. As I said the units work fine seperately with great audio reports but I want them to work in transceive. I am not one to jump into alignment unless it is necessary and this does seem to come from somewhere else. Since the audio from the mic is always hot I could switch it off but I would like to make them work as designed. Any hints or ideas would be absolutely greatly appreciated.

JIm. 



-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=HEATH
To post - HEATH at LISTS.TEMPE.GOV
Archives - http://lists.tempe.gov/archives/HEATH.html