[Heathkit] SB-102 drive belts

[Bob Burns]

In a message dated 15/01/2010 14:00:42 GMT Standard Time,  
wb2vuf at VERIZON.NET writes:

Paul:

The original design used rubber "O" rings on all 3  shafts. Later designs 
used dial cord and a spring only on the Final  Loading control. For the 
Driver/Preselector, try a number 226 "O" ring,  available at better 
hardware and plumbing supply stores, and some auto  parts stores.


73,

Bob  WB2VUF



Hi All
 
You can get replacement O rings from _http://www.ultrawebb.com/OHP/_ 
(http://www.ultrawebb.com/OHP/)  at  $3 per set plus postage.
 
73

Bob 

Bob F Burns
Amateur  radio callsign G3OOU
G-QRP member No. 6907
Joint site with Crystal Palace  Radio & Electronics Club: _www.g3oou.co.uk_ 
(http://www.g3oou.co.uk/) 
My technical site: _http://www.qsl.net/g3oou/_ (http://www.qsl.net/g3oou/) 

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=HEATH
To post - HEATH at LISTS.TEMPE.GOV
Archives - http://lists.tempe.gov/archives/HEATH.html