Off topic: Crimp connectors

[Paul Kraemer]

Ron
IMHO most folks don't own the industrial tooling necessary to produce the 
required crimp. Of course, many of the discount store connectors it wouldn't 
matter what they are crimped with as the results are less than perfect 
anyway.
Solder them.
Paul K0UYA
----- Original Message ----- 
From: "Ron Kramer" <kd6edv at GMAIL.COM>
To: <HEATH at LISTS.TEMPE.GOV>
Sent: Monday, May 24, 2010 2:51 PM
Subject: Off topic: Crimp connectors


>I am using crimp connectors in wiring up solar chargers to solar
> panels. Would it be better to solder the connector after crimping the
> wire or just crimp the wire only? The crimp connectors are screwed to
> barrier strips. The system is running 12v 1 amp.
>
>
> -- 
> Ron KD6EDV
>
> SKCC# 3551
>
> FPqrp# 2132
>
> -----------------------------------------------------------
> Products bought, sold or traded here is the responsibility of the
> parties involved.  This list and the City of Tempe are not responsible
> for losses or misrepresentations of any kind.  Buyer beware!
>
> -----------------------------------------------------------
> This list is a public service of the City of Tempe, Arizona
> -----------------------------------------------------------
>
> Subscription control - http://www.tempe.gov/lists/control.aspx?list=HEATH
> To post - HEATH at LISTS.TEMPE.GOV
> Archives - http://lists.tempe.gov/archives/HEATH.html
> 

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=HEATH
To post - HEATH at LISTS.TEMPE.GOV
Archives - http://lists.tempe.gov/archives/HEATH.html