[Heath] Question

Dave Edwards kd2e at comcast.net
Sun Apr 24 12:14:37 EDT 2011


Thanks Glen!  I have a few of each of those model numbers, but never used the 650 with the 303 on transceive.
...Dave

Sent from my iPad

On Apr 24, 2011, at 11:52 AM, Glen Zook <gzook at yahoo.com> wrote:

> The tube-type equipment seems to have more output from, especially, the heterodyne oscillator.  I have an SB-650, along with an SB-303 and SB-401 in right now for a client.  When the SB-303 is hooked to the SB-401 the SB-650 does not read correctly on the 10-meter band and is flaky on 15-meters.  However, when hooked to an SB-301 along with the SB-401 it reads fine on all bands.
> 
> Now when used with one of the transceivers, since there is not an additional load on the heterodyne oscillator from the transmitter, it works fine.
> 
> Glen, K9STH
> 
> Website: http://k9sth.com
> 
> --- On Sat, 4/23/11, Dave Edwards <kd2e at comcast.net> wrote:
> 
> From: Dave Edwards <kd2e at comcast.net>
> Subject: Re: [Heath] Question
> To: "Glen Zook" <gzook at yahoo.com>, heath at puck.nether.net, w9bzn1 at gmail.com
> Date: Saturday, April 23, 2011, 9:22 PM
> 
> Just curious....Why does the SB-650 work better with ...for example, an SB301 than the solid state SB-303?
> Does it have to do with tapping in to the oscillators without pulling them off?
>  
> ....Dave
> ----- Original Message -----
> From: Glen Zook
> To: heath at puck.nether.net ; w9bzn1 at gmail.com
> Sent: Saturday, April 23, 2011 12:07 PM
> Subject: Re: [Heath] Question
> 
> Try AADE for a readout.
> 
> The SB-650 actually works better with the tube-type equipment than the SB-303.
> 
> Glen, K9STH
> 
> Website: http://k9sth.com
> 
> --- On Thu, 4/21/11, william moody <w9bzn1 at gmail.com> wrote:
> 
> From: william moody <w9bzn1 at gmail.com>
> Subject: [Heath] Question
> To: heath at puck.nether.net
> Date: Thursday, April 21, 2011, 9:24 PM
> 
> I have a question for you gentlemen, I have purchased a hr1680 and hx1681 and would like to have a digital readout. Is there a such an device available for this setup made by heath or someone other than heath that I might turn to.....
>  I am aware of the sb 650 but I thought it was just for the 303...
>  Thanks Guys
>      Bill
> 
> -----Inline Attachment Follows-----
> 
> _______________________________________________
> Heath mailing list
> Heath at puck.nether.net
> https://puck.nether.net/mailman/listinfo/heath
> _______________________________________________
> Heath mailing list
> Heath at puck.nether.net
> https://puck.nether.net/mailman/listinfo/heath
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/heath/attachments/20110424/04d0b8f5/attachment-0001.html>


More information about the Heath mailing list