[Heath] HO 10 scope question

[Charles W. Morehouse]

Hi Mike,
Yes, have restored a couple of them and others with the same circuit.  Replace the HIV caps and all the resistors in the HV circuit.
The electrolytics are unobtanium, but I cut off the base with a Dremmel tool and install new caps inside.  Epoxy the can together.
Works great and keeps the look original.  Suspect the 1V2.  Makes a great scope to monitor your stereo.  Good luck.
Wayne,
W4GBW


"Madam, we have given you a republic, if you can keep it."  Ben Franklin




  ----- Original Message ----- 
  From: K5MLC (Mike) 
  To: Heathkit 
  Sent: Tuesday, July 05, 2011 4:14 PM
  Subject: [Heath] HO 10 scope question


  Hello,

  After sitting unused for a while, my HO10 monitor scope appears to be dead.  It was working FB before being shelved.  As far as I know, it has never been recapped.  Should I start there? Anyone have any other ideas/suggestions?? 

  Thanks in advance.

  Mike  K5MLC


------------------------------------------------------------------------------


  _______________________________________________
  Heath mailing list
  Heath at puck.nether.net
  https://puck.nether.net/mailman/listinfo/heath
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/heath/attachments/20110705/8f904119/attachment.html>