[Heath] HO 10 scope question

[cemilton at aol.com]

Try   www.hayseedhamfest.com        They have a complete re-build kit for the scope.  

73
Chuck
W4MIL


Remember, the government cannot give anything to anyone that they have
not first taken away from someone else.




-----Original Message-----
From: Charles W. Morehouse <w4gbw at bellsouth.net>
To: K5MLC (Mike) <k5mlc at sbcglobal.net>; Heathkit <heath at puck.nether.net>
Sent: Tue, Jul 5, 2011 7:44 pm
Subject: Re: [Heath] HO 10 scope question


Hi Mike,
Yes, have restored a couple of them and others with the same circuit.  Replace the HIV caps and all the resistors in the HV circuit.
The electrolytics are unobtanium, but I cut off the base with a Dremmel tool and install new caps inside.  Epoxy the can together.
Works great and keeps the look original.  Suspect the 1V2.  Makes a great scope to monitor your stereo.  Good luck.
Wayne,
W4GBW
 
 
"Madam, we have given you a republic, if you can keep it."  Ben Franklin
 
 
 
 

----- Original Message ----- 
From: K5MLC (Mike) 
To: Heathkit 
Sent: Tuesday, July 05, 2011 4:14 PM
Subject: [Heath] HO 10 scope question




Hello,
 
After sitting unused for a while, my HO10 monitor scope appears to be dead.  It was working FB before being shelved.  As far as I know, it has never been recapped.  Should I start there? Anyone have any other ideas/suggestions?? 
 
Thanks in advance.
 
Mike  K5MLC



_______________________________________________
Heath mailing list
Heath at puck.nether.net
https://puck.nether.net/mailman/listinfo/heath


_______________________________________________
eath mailing list
eath at puck.nether.net
ttps://puck.nether.net/mailman/listinfo/heath

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/heath/attachments/20110705/e9507ebe/attachment.html>