[Heath] Fw: stringing the dial cord

[Dick KF4NS]

Thanks very much to all who replied. I now have some very simple ways 
to do the job. So much better than the 18-step method I had in my 
files. I think I got this one from an old Hints and Kinks. Anyway, now 
I can get 'er fixed.
73, Dick KF4NS
St Petersburg, FL 33714 USA
Keep The Glow!

----- Original Message ----- 
From: "Dick KF4NS" <kf4nsradio at verizon.net>
To: <heathkit at mailman.qth.net>
Sent: Wednesday, March 23, 2011 3:46 PM
Subject: stringing the dial cord


:I seem to have lost contact with the gentleman who was going to 
assist
: me with a copy of the procedure as shown in the SB-102 manual. I am
: trying to change from belt on the final load cap to string in my
: HW-100.
:
: Can anyone help me out?  I have the springs and dial cord but the 
only
: drawing I could
: find totally confused me. It has 18 steps to string it. I am not a
: mechanical engineer, just a lowly
: technician.
:
: I was told there is a page in the assembly section of the 102
: describing the installation procedure.
:
: 73, Dick KF4NS
: St Petersburg, FL 33714 USA
: Keep The Glow!
: