[Heath] T-4 Probe or T-4 Probe Fabrication

[Ron]

You can easily and cheaply make two probes -- one straight through
(for audio tracing) and the other with a series diode in it (for RF).
You'll have to mount a jack (say, 1/4" phone or BNC) in the hole
through which the probe cable originally went.

-- Ron


On 1/9/2013 1:10 PM, Jerry Rego wrote:
> I have a T-4 that I have cleaned up and checked out.  As far as I 
> can tell it is in good working order now that I cleaned up the 
> potentiometers and the switches.  The only draw back is I don't 
> have a probe for it.
> Does anyone have a probe  OR does anyone know where i can find a 
> kit that has the thick probe handle that you could slide a pc 
> board down and had a screw top and metal probe tip on it?
> Any assistance would be greatly appreciated!!!
> Gus Rego
> via Jerry_Rego at comcast.net <mailto:Jerry_Rego at comcast.net>
>
> No virus found in this message.
> Checked by AVG - www.avg.com <http://www.avg.com>
> Version: 2013.0.2805 / Virus Database: 2637/6021 - Release Date: 
> 01/09/13
>
>
>
> _______________________________________________
> Heath mailing list
> Heath at puck.nether.net
> https://puck.nether.net/mailman/listinfo/heath

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/heath/attachments/20130110/e6ca52df/attachment.html>