[Heath] [Heathkit] MR-1 part NEEDED

[Glen Zook]

I may have the potentiometer.  A while back I performed a "Frankenstein" on both the MT-1 and MR-1.  That is, I took 2-units that were in bad shape and made a single transmitter and a single receiver using parts from both units.  As such, I still have the chassis that was left over after getting the units working.
 
Glen, K9STH


Website:  http://k9sth.com



On Saturday, November 9, 2013 4:30 PM, Alexander N. Gerli <ac1wye at gmail.com> wrote:
 
Hi, folks,

The MT-1/MR-1 are running now. There's a problem with the receiver's
S-meter circuit. The S-Meter Zero pot, Heath p/n 11-30 is that
surface-mounted wirewound pot mounted on the chassis. Well, it has a bad
spot right where I need to adjust it. So, the S-meter either works sort-of,
or it doesn't. Just my luck, good ol' Murphy.

I could cobble in there some sort of 25-ohm pot, but it wouldn't be right.
I would like to keep these original as much as I can.

Does anyone have a parts-car MR-1 out there, that I could get the S-meter
pot from? As long as it's good, I'd be grateful!

73, Sandy AC1Y




Alexander N. Gerli, Sr.
548 Allred Mill Road
Mount Airy, NC 27030-2202

Scotsmen walk about 900 miles each year.
A Scotsman drinks around 45 gallons of Whisky a year.
Scotsmen get about 20 Miles Per Gallon.
______________________________________________________________
Heathkit mailing list
Home: http://mailman.qth.net/mailman/listinfo/heathkit
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Heathkit at mailman.qth.net

List Administrator: Duane Fischer, W8DBF
** For Assistance: dfischer at usol.com **


This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/heath/attachments/20131109/8f9a4913/attachment.html>