[Heath] Lubing / Unsticking' the SB-401 LMO

[Robert Myers]

Thanks to everyone for advice on 'unsticking' the SB-401 LMO that locks at
4-1/4 revolutions (as shown on the turns counter dial).

A couple follow up questions:  

1. What grease cutters or cleaners do people recommend for removing the
dried, or thick, original lubricant. 

2.  What do people recommend for lubricating the system after step 1 (and do
you need to use conductive grease anywhere in there)?

Thanks,
--- Rob Myers, VE3JQL