[Heath] Dry Transfer lettering

[Bill Guyger]

I'm pretty sure Letraset doesn't come already made up into words, but you can use their sheets to spell out whatever you want. I've got a trick for aligning the individual letters and that is to make a transparent overlay with guide lines on it, tape it to the panel in such a way that you can slide the Letraset sheet under the overlay align the letter you're going to rub off, lift the overlay out of the way rub down that letter and repeat until done.

Kind of tedious but makes things look nearly aligned when done.

Bill AD5OL

Sent from my iPhone

> On Dec 18, 2015, at 9:19 PM, Alexander N. Gerli <ac1wye at gmail.com> wrote:
> 
> Hi, Folks!  Well, Murphy is at it again. Back when, Datak made their great LETRASET panel lettering sets. But Datak is no more, and the only other one, Russell Industries on Long Island, does NOT make white sets any more. I called them and got the news.
> 
> I sure would like to find a set of Letraset WHITE in the two words "STANDBY" and "OPERATE".  I just installed an 'invisible' Standby Switch in my SB-220 by rettofitting a 100K pot with a switch for the SENSITIVITY control. No extra holes to drill, but it is a wicked close fit to the end bell of the Filament Transformer. All I need to do is add the two words to the panel.
> 
> Can anyone on the List help me out with this?
> 
> 73,
> 
> Sandy AC1Y
> 
> 
> -- 
> God's Blessings!
> 
> 
> 
> Alexander N. Gerli, Sr.
> 548 Allred Mill Road
> Mount Airy, NC 27030-2202
> 
> Scotsmen walk about 900 miles each year.
> A Scotsman drinks around 45 gallons of Whisky a year.
> Scotsmen get about 20 Miles Per Gallon.
> 
> _______________________________________________
> Heath mailing list
> Heath at puck.nether.net
> https://puck.nether.net/mailman/listinfo/heath
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/heath/attachments/20151219/017efd0b/attachment.html>