[Heath] Dry Transfer lettering

[Dave Edwards]

Sandy....I'd suggest a post in the homebrew section of eham.
...Dave

On 12/18/15 10:19 PM, Alexander N. Gerli wrote:
> Hi, Folks!  Well, Murphy is at it again. Back when, Datak made their 
> great LETRASET panel lettering sets. But Datak is no more, and the 
> only other one, Russell Industries on Long Island, does NOT make white 
> sets any more. I called them and got the news.
>
> I sure would like to find a set of Letraset WHITE in the two words 
> "STANDBY" and "OPERATE".  I just installed an 'invisible' Standby 
> Switch in my SB-220 by rettofitting a 100K pot with a switch for the 
> SENSITIVITY control. No extra holes to drill, but it is a wicked close 
> fit to the end bell of the Filament Transformer. All I need to do is 
> add the two words to the panel.
>
> Can anyone on the List help me out with this?
>
> 73,
>
> Sandy AC1Y
>
>
> -- 
> God's Blessings!
>
>
>
> Alexander N. Gerli, Sr.
> 548 Allred Mill Road
> Mount Airy, NC 27030-2202
>
> Scotsmen walk about 900 miles each year.
> A Scotsman drinks around 45 gallons of Whisky a year.
> Scotsmen get about 20 Miles Per Gallon.
>
>
>
> _______________________________________________
> Heath mailing list
> Heath at puck.nether.net
> https://puck.nether.net/mailman/listinfo/heath

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/heath/attachments/20151219/0b5f6d0f/attachment.html>