[Heath] SB-220 plate meter

[G. Lofstead]

USUALLY RUST IN BOTTOM OF METER ON IRON PARTS...
jERRYW3CDE 


     On Sunday, May 17, 2015 1:06 PM, Kenneth G. Gordon <kgordon2006 at frontier.com> wrote:
   
 

 Hmmm....well, the plate meter on my just newly aquired SB-220 is very 
sticky and doesn't appear to read accurately.

Although I have not yet checked the calibration resistor(s), the meter 
itself is very "sticky", with the needle hanging up at various places on 
the scale, but most especially near the bottom 100 mA position.

Might anyone have a replacement? Or know someone who could repair it?

Ken W7EKB
_______________________________________________
Heath mailing list
Heath at puck.nether.net
https://puck.nether.net/mailman/listinfo/heath


 
   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/heath/attachments/20150517/2d5ae2be/attachment.html>