[Heath] LMO mod

[Kenneth G. Gordon]

On 14 Apr 2018 at 12:25, Mike Fitzgerald wrote:

> Here's a "before" and "after" the mod.  I used two pieces  of copper
> braid from the face of the brass gear to the chassis box behind the
> gear.  I checked the resistance from the gear / rotor shaft to ground
> before and found it very erratic from zero to 20 ohms (prox). Checked
> it after the braid mod and found it to be rock solid at zero ohms.  So
> far so good..Worm gear lightly lubed...Shaft bearings lightly lubed
> with gun oil....Closed up and ready to re-install...I'll let ya
> know...   Mike AA7WU 

Excellent, Michael! Ya done good, Kid. ;-)

Ken W7EKB

---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus