[j-nsp] cisco's multivrf with routing instances.. is this possible?
Fri, 2 Aug 2002 00:27:15 +0200
On Thu, Aug 01, 2002 at 05:25:51PM -0500, firstname.lastname@example.org wrote:
> On Fri, 2 Aug 2002, Jesper Skriver wrote:
> > On Wed, Jul 31, 2002 at 02:37:37PM -0500, email@example.com wrote:
> > >
> > > Hi everybody, I have a customer asking me whether is possible to
> > > configure something similar to cisco's multivrf feature, which is just a
> > > CE router with multiple l3 vpn vrfs. It seems to me that this is possible
> > > with a forwarding routing instances on JunOS but I haven't seen any
> > > examples. Has anynone tried this? if so, can you fwd me the configuration
> > > on the CE and PE, thanks.. and if not, is this not supported yet on JunOS?
> > Plenty got it, go read the documentation, L3 VPN's
> Sorry about the duplicated emails.. i just didnt get any for some time and
> now im getting all .. and most of them duplicated..
> Anyways, i have read the documentation.. and i can't find any example of a
> CE router with multiple VRFs routing instances.. remember.. CE router.. so
> no MBGP
So don't configure BGP
> Could you point me to where in the documentation specifies that this is
> possible?.. thanks
Jesper Skriver, jesper(at)skriver(dot)dk - CCIE #5456
Senior network engineer @ AS3292, TDC Tele Danmark
One Unix to rule them all, One Resolver to find them,
One IP to bring them all and in the zone to bind them.