[j-nsp] OSPF between Passport 8600 and Juniper M20 via STM-1 ATM connecti
on
Philipp Volkemer
philipp.volkemer@nortelnetworks.com
Tue, 5 Nov 2002 11:53:36 -0000
This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
------_=_NextPart_001_01C284C1.A4CBC06A
Content-Type: text/plain;
charset="iso-8859-1"
Hi,
I'm trying to run OSPF between a Passport 8600 and a Juniper M20 across an
ATM STM-1 connection.
The link is working fine, I can ping, etc. but OSPF state will remain in
"Exchange" and not go into full?
I've never done this before so maybe it's a stupid question but any hints
are welcome.
Here's the config of the Juniper interface:
philipp@M20-ISP-Lab> show configuration interfaces at-1/0/0
description STM-1-To-ISP4-4/1;
clocking internal;
encapsulation atm-pvc;
atm-options {
vpi 0 {
maximum-vcs 200;
}
}
unit 102 {
description VCC0.102-to-ISP4/1;
encapsulation atm-snap;
vci 0.102;
inverse-arp;
family inet {
mtu 1950;
address 10.222.63.17/29;
}
}
philipp@M20-ISP-Lab> show configuration protocols ospf
area 0.0.0.0 {
interface at-1/0/0.102 {
priority 2;
retransmit-interval 4;
transit-delay 1;
hello-interval 10;
dead-interval 40;
neighbor 10.222.63.18;
poll-interval 120;
}
}
Thanks,
Philipp
--
Philipp Volkemer
Support Specialist Intelligent Internet NTS
- Nortel Networks Certified Specialist -
Nortel Networks Germany GmbH & Co. KG
Hahnstrasse 37-39
D-60528 Frankfurt am Main
Tel +49 69 6697-1046; ESN 581 1046
Fax +49 69 6697-1781; ESN 581 1781
Mobile +49 151 1265-1019; ESN 561 1019
philipp.volkemer@nortelnetworks.com
www.nortelnetworks.com
------_=_NextPart_001_01C284C1.A4CBC06A
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; =
charset=3Diso-8859-1">
<META NAME=3D"Generator" CONTENT=3D"MS Exchange Server version =
5.5.2655.35">
<TITLE>OSPF between Passport 8600 and Juniper M20 via STM-1 ATM =
connection</TITLE>
</HEAD>
<BODY>
<P><FONT SIZE=3D2>Hi,</FONT>
</P>
<P><FONT SIZE=3D2>I'm trying to run OSPF between a Passport 8600 and a =
Juniper M20 across an ATM STM-1 connection.</FONT>
<BR><FONT SIZE=3D2>The link is working fine, I can ping, etc. but OSPF =
state will remain in "Exchange" and not go into full?</FONT>
</P>
<P><FONT SIZE=3D2>I've never done this before so maybe it's a stupid =
question but any hints are welcome.</FONT>
</P>
<P><FONT SIZE=3D2>Here's the config of the Juniper interface:</FONT>
</P>
<P><FONT SIZE=3D2>philipp@M20-ISP-Lab> show configuration interfaces =
at-1/0/0 </FONT>
<BR><FONT SIZE=3D2>description STM-1-To-ISP4-4/1;</FONT>
<BR><FONT SIZE=3D2>clocking internal;</FONT>
<BR><FONT SIZE=3D2>encapsulation atm-pvc;</FONT>
<BR><FONT SIZE=3D2>atm-options {</FONT>
<BR><FONT SIZE=3D2> vpi 0 {</FONT>
<BR><FONT SIZE=3D2> =
maximum-vcs 200;</FONT>
<BR><FONT SIZE=3D2> }</FONT>
<BR><FONT SIZE=3D2>}</FONT>
<BR><FONT SIZE=3D2>unit 102 {</FONT>
<BR><FONT SIZE=3D2> description =
VCC0.102-to-ISP4/1;</FONT>
<BR><FONT SIZE=3D2> encapsulation atm-snap;</FONT>
<BR><FONT SIZE=3D2> vci 0.102;</FONT>
<BR><FONT SIZE=3D2> inverse-arp;</FONT>
<BR><FONT SIZE=3D2> family inet {</FONT>
<BR><FONT SIZE=3D2> mtu =
1950;</FONT>
<BR><FONT SIZE=3D2> address =
10.222.63.17/29;</FONT>
<BR><FONT SIZE=3D2> }</FONT>
<BR><FONT SIZE=3D2>}</FONT>
</P>
<P><FONT SIZE=3D2>philipp@M20-ISP-Lab> show configuration protocols =
ospf </FONT>
<BR><FONT SIZE=3D2>area 0.0.0.0 {</FONT>
<BR><FONT SIZE=3D2> interface at-1/0/0.102 {</FONT>
<BR><FONT SIZE=3D2> priority =
2;</FONT>
<BR><FONT SIZE=3D2> =
retransmit-interval 4;</FONT>
<BR><FONT SIZE=3D2> =
transit-delay 1;</FONT>
<BR><FONT SIZE=3D2> =
hello-interval 10;</FONT>
<BR><FONT SIZE=3D2> =
dead-interval 40;</FONT>
<BR><FONT SIZE=3D2> neighbor =
10.222.63.18;</FONT>
<BR><FONT SIZE=3D2> =
poll-interval 120;</FONT>
<BR><FONT SIZE=3D2> }</FONT>
<BR><FONT SIZE=3D2>}</FONT>
</P>
<BR>
<P><FONT SIZE=3D2>Thanks,</FONT>
</P>
<P><FONT SIZE=3D2>Philipp</FONT>
</P>
<BR>
<P><FONT SIZE=3D2>--</FONT>
<BR><FONT SIZE=3D2>Philipp Volkemer</FONT>
<BR><FONT SIZE=3D2>Support Specialist Intelligent Internet NTS</FONT>
<BR><FONT SIZE=3D2>- Nortel Networks Certified Specialist -</FONT>
<BR><FONT SIZE=3D2>Nortel Networks Germany GmbH & Co. KG</FONT>
<BR><FONT SIZE=3D2>Hahnstrasse 37-39</FONT>
<BR><FONT SIZE=3D2>D-60528 Frankfurt am Main</FONT>
<BR><FONT SIZE=3D2>Tel +49 69 6697-1046; ESN 581 1046</FONT>
<BR><FONT SIZE=3D2>Fax +49 69 6697-1781; ESN 581 1781</FONT>
<BR><FONT SIZE=3D2>Mobile +49 151 1265-1019; ESN 561 1019</FONT>
<BR><FONT SIZE=3D2>philipp.volkemer@nortelnetworks.com</FONT>
<BR><FONT SIZE=3D2>www.nortelnetworks.com</FONT>
</P>
</BODY>
</HTML>
------_=_NextPart_001_01C284C1.A4CBC06A--