[j-nsp] OSPF between Passport 8600 and Juniper M20 via STM-1 ATM connecti on
Eduard Metz
emetz@thrupoint.net
Tue, 5 Nov 2002 13:30:21 +0100
This is a multi-part message in MIME format.
------=_NextPart_000_0102_01C284CF.7E1ECE40
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
OSPF between Passport 8600 and Juniper M20 via STM-1 ATM connectionCould be
the MTU - make sure OSPF parameters are equal on both sides. Hard to guess
without the Passport side of things ...
cheers,
Eduard
-----Original Message-----
From: juniper-nsp-admin@puck.nether.net
[mailto:juniper-nsp-admin@puck.nether.net]On Behalf Of Philipp Volkemer
Sent: dinsdag 5 november 2002 12:54
To: 'juniper-nsp@puck.nether.net'
Subject: [j-nsp] OSPF between Passport 8600 and Juniper M20 via STM-1 ATM
connecti on
Hi,
I'm trying to run OSPF between a Passport 8600 and a Juniper M20 across an
ATM STM-1 connection.
The link is working fine, I can ping, etc. but OSPF state will remain in
"Exchange" and not go into full?
I've never done this before so maybe it's a stupid question but any hints
are welcome.
Here's the config of the Juniper interface:
philipp@M20-ISP-Lab> show configuration interfaces at-1/0/0
description STM-1-To-ISP4-4/1;
clocking internal;
encapsulation atm-pvc;
atm-options {
vpi 0 {
maximum-vcs 200;
}
}
unit 102 {
description VCC0.102-to-ISP4/1;
encapsulation atm-snap;
vci 0.102;
inverse-arp;
family inet {
mtu 1950;
address 10.222.63.17/29;
}
}
philipp@M20-ISP-Lab> show configuration protocols ospf
area 0.0.0.0 {
interface at-1/0/0.102 {
priority 2;
retransmit-interval 4;
transit-delay 1;
hello-interval 10;
dead-interval 40;
neighbor 10.222.63.18;
poll-interval 120;
}
}
Thanks,
Philipp
--
Philipp Volkemer
Support Specialist Intelligent Internet NTS
- Nortel Networks Certified Specialist -
Nortel Networks Germany GmbH & Co. KG
Hahnstrasse 37-39
D-60528 Frankfurt am Main
Tel +49 69 6697-1046; ESN 581 1046
Fax +49 69 6697-1781; ESN 581 1781
Mobile +49 151 1265-1019; ESN 561 1019
philipp.volkemer@nortelnetworks.com
www.nortelnetworks.com
------=_NextPart_000_0102_01C284CF.7E1ECE40
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; =
charset=3Diso-8859-1">
<TITLE>OSPF between Passport 8600 and Juniper M20 via STM-1 ATM =
connection</TITLE>
<META content=3D"MSHTML 5.50.4134.600" name=3DGENERATOR></HEAD>
<BODY>
<DIV><SPAN class=3D532112912-05112002><FONT face=3DArial color=3D#0000ff =
size=3D2>Could=20
be the MTU - make sure OSPF parameters are equal on both sides. Hard to =
guess=20
without the Passport side of things ...</FONT></SPAN></DIV>
<DIV><SPAN class=3D532112912-05112002><FONT face=3DArial color=3D#0000ff =
size=3D2></FONT></SPAN> </DIV>
<DIV><SPAN class=3D532112912-05112002><FONT face=3DArial color=3D#0000ff =
size=3D2>cheers,</FONT></SPAN></DIV>
<DIV><SPAN class=3D532112912-05112002> <FONT =
face=3DArial=20
color=3D#0000ff size=3D2>Eduard</FONT></SPAN></DIV>
<BLOCKQUOTE dir=3Dltr=20
style=3D"PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #0000ff 2px =
solid; MARGIN-RIGHT: 0px">
<DIV class=3DOutlookMessageHeader dir=3Dltr align=3Dleft><FONT =
face=3DTahoma=20
size=3D2>-----Original Message-----<BR><B>From:</B>=20
juniper-nsp-admin@puck.nether.net=20
[mailto:juniper-nsp-admin@puck.nether.net]<B>On Behalf Of </B>Philipp=20
Volkemer<BR><B>Sent:</B> dinsdag 5 november 2002 12:54<BR><B>To:</B>=20
'juniper-nsp@puck.nether.net'<BR><B>Subject:</B> [j-nsp] OSPF between =
Passport=20
8600 and Juniper M20 via STM-1 ATM connecti on<BR><BR></FONT></DIV>
<P><FONT size=3D2>Hi,</FONT> </P>
<P><FONT size=3D2>I'm trying to run OSPF between a Passport 8600 and a =
Juniper=20
M20 across an ATM STM-1 connection.</FONT> <BR><FONT size=3D2>The link =
is=20
working fine, I can ping, etc. but OSPF state will remain in =
"Exchange" and=20
not go into full?</FONT> </P>
<P><FONT size=3D2>I've never done this before so maybe it's a stupid =
question=20
but any hints are welcome.</FONT> </P>
<P><FONT size=3D2>Here's the config of the Juniper interface:</FONT> =
</P>
<P><FONT size=3D2>philipp@M20-ISP-Lab> show configuration =
interfaces=20
at-1/0/0 </FONT><BR><FONT size=3D2>description=20
STM-1-To-ISP4-4/1;</FONT> <BR><FONT size=3D2>clocking internal;</FONT> =
<BR><FONT=20
size=3D2>encapsulation atm-pvc;</FONT> <BR><FONT size=3D2>atm-options =
{</FONT>=20
<BR><FONT size=3D2> vpi 0 {</FONT> <BR><FONT=20
size=3D2> maximum-vcs =
200;</FONT>=20
<BR><FONT size=3D2> }</FONT> <BR><FONT =
size=3D2>}</FONT>=20
<BR><FONT size=3D2>unit 102 {</FONT> <BR><FONT =
size=3D2> =20
description VCC0.102-to-ISP4/1;</FONT> <BR><FONT =
size=3D2> =20
encapsulation atm-snap;</FONT> <BR><FONT size=3D2> =
vci=20
0.102;</FONT> <BR><FONT size=3D2> =
inverse-arp;</FONT>=20
<BR><FONT size=3D2> family inet {</FONT> <BR><FONT=20
size=3D2> mtu 1950;</FONT> =
<BR><FONT=20
size=3D2> address=20
10.222.63.17/29;</FONT> <BR><FONT size=3D2> }</FONT> =
<BR><FONT=20
size=3D2>}</FONT> </P>
<P><FONT size=3D2>philipp@M20-ISP-Lab> show configuration protocols =
ospf </FONT><BR><FONT size=3D2>area 0.0.0.0 {</FONT> =
<BR><FONT=20
size=3D2> interface at-1/0/0.102 {</FONT> <BR><FONT=20
size=3D2> priority 2;</FONT> =
<BR><FONT=20
size=3D2> =
retransmit-interval=20
4;</FONT> <BR><FONT =
size=3D2> =20
transit-delay 1;</FONT> <BR><FONT=20
size=3D2> hello-interval =
10;</FONT>=20
<BR><FONT size=3D2> =
dead-interval=20
40;</FONT> <BR><FONT =
size=3D2> =20
neighbor 10.222.63.18;</FONT> <BR><FONT=20
size=3D2> poll-interval =
120;</FONT>=20
<BR><FONT size=3D2> }</FONT> <BR><FONT =
size=3D2>}</FONT>=20
</P><BR>
<P><FONT size=3D2>Thanks,</FONT> </P>
<P><FONT size=3D2>Philipp</FONT> </P><BR>
<P><FONT size=3D2>--</FONT> <BR><FONT size=3D2>Philipp Volkemer</FONT> =
<BR><FONT=20
size=3D2>Support Specialist Intelligent Internet NTS</FONT> <BR><FONT =
size=3D2>-=20
Nortel Networks Certified Specialist -</FONT> <BR><FONT =
size=3D2>Nortel Networks=20
Germany GmbH & Co. KG</FONT> <BR><FONT size=3D2>Hahnstrasse =
37-39</FONT>=20
<BR><FONT size=3D2>D-60528 Frankfurt am Main</FONT> <BR><FONT =
size=3D2>Tel +49 69=20
6697-1046; ESN 581 1046</FONT> <BR><FONT size=3D2>Fax +49 69 =
6697-1781; ESN 581=20
1781</FONT> <BR><FONT size=3D2>Mobile +49 151 1265-1019; ESN 561 =
1019</FONT>=20
<BR><FONT size=3D2>philipp.volkemer@nortelnetworks.com</FONT> =
<BR><FONT=20
size=3D2>www.nortelnetworks.com</FONT> </P></BLOCKQUOTE></BODY></HTML>
------=_NextPart_000_0102_01C284CF.7E1ECE40--