[j-nsp] OSPF between Passport 8600 and Juniper M20 via STM-1
ATM connecti on
Philipp Volkemer
philipp.volkemer@nortelnetworks.com
Tue, 5 Nov 2002 12:33:23 -0000
This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
------_=_NextPart_001_01C284C7.64F9894E
Content-Type: text/plain;
charset="iso-8859-1"
Sorry,
forgot the Passport section:
atm 9/1 state enable
atm 9/1 framing-mode sdh
atm 9/1 clock-source loop-timed
atm 9/1 name "PP6K-ISP1-8/0"
atm 9/1 pvc create 0.102 name "PP86-PP6K-VCC0.102"
atm 9/1 pvc f5-oam 0.102 enable send 5 retry 1 up 3 down 5 trap disable
atm 9/1 pvc 1483 ip create 102 0.102 10.222.63.17 disable 0
atm 9/2 state enable
atm 9/2 framing-mode sdh
atm 9/2 name "PP86-Shasta-12/2"
atm 9/2 pvc create 0.112 name "PP86-Shasta-VCC0.112"
atm 9/2 pvc f5-oam 0.112 enable send 5 retry 1 up 3 down 5 trap disable
atm 9/2 pvc create 0.116 name "PP86-Shasta-VCC0.116"
atm 9/2 pvc f5-oam 0.116 enable send 5 retry 1 up 3 down 5 trap disable
atm 9/2 pvc 1483 ip create 112 0.112 10.222.63.3 disable 0
atm 9/2 pvc 1483 ip create 116 0.116 10.222.63.11 disable 0
vlan 102 create byport 1 name "Fiducia-PP-Juniper" color 1
vlan 102 ports remove 1/1-1/48,2/1-2/4,3/1-3/8,9/2-9/5 member portmember
vlan 102 ports add 9/1 member portmember
vlan 102 ip create 10.222.63.18/255.255.255.248 mac_offset 6
vlan 102 ip ospf enable
vlan 112 create byipsubnet 1 10.222.63.0/255.255.255.248 name
"PP86-Shasta-VCC0.112" color 32
vlan 112 ports remove 1/1-1/48,2/1-2/4,3/1-3/8,9/1,9/3-9/5 member portmember
vlan 112 ports add 9/2 member portmember
vlan 112 ports add 9/2 member static
vlan 112 ports remove 1/1-1/48,2/3-2/4,3/1-3/8,9/1,9/3-9/5 member portmember
vlan 112 ip create 10.222.63.4/255.255.255.248 mac_offset 7
vlan 116 create byipsubnet 1 10.222.63.8/255.255.255.248 name
"PP86-Shasta-VCC0.116" color 31
vlan 116 ports remove 1/1-1/48,2/1-2/4,3/1-3/8,9/1,9/3-9/5 member portmember
vlan 116 ports add 9/2 member portmember
vlan 116 ports add 9/2 member static
vlan 116 ports remove 1/1-1/48,2/3-2/4,3/1-3/8,9/1,9/3-9/5 member portmember
vlan 116 ip create 10.222.63.12/255.255.255.248 mac_offset 8
-----Original Message-----
From: Eduard Metz [mailto:emetz@thrupoint.net]
Sent: Tuesday, November 05, 2002 1:30 PM
To: Volkemer, Philipp [HAHN:7000:EXCH]; juniper-nsp@puck.nether.net
Subject: RE: [j-nsp] OSPF between Passport 8600 and Juniper M20 via STM-1
ATM connecti on
Could be the MTU - make sure OSPF parameters are equal on both sides. Hard
to guess without the Passport side of things ...
cheers,
Eduard
-----Original Message-----
From: juniper-nsp-admin@puck.nether.net
[mailto:juniper-nsp-admin@puck.nether.net]On Behalf Of Philipp Volkemer
Sent: dinsdag 5 november 2002 12:54
To: 'juniper-nsp@puck.nether.net'
Subject: [j-nsp] OSPF between Passport 8600 and Juniper M20 via STM-1 ATM
connecti on
Hi,
I'm trying to run OSPF between a Passport 8600 and a Juniper M20 across an
ATM STM-1 connection.
The link is working fine, I can ping, etc. but OSPF state will remain in
"Exchange" and not go into full?
I've never done this before so maybe it's a stupid question but any hints
are welcome.
Here's the config of the Juniper interface:
philipp@M20-ISP-Lab> show configuration interfaces at-1/0/0
description STM-1-To-ISP4-4/1;
clocking internal;
encapsulation atm-pvc;
atm-options {
vpi 0 {
maximum-vcs 200;
}
}
unit 102 {
description VCC0.102-to-ISP4/1;
encapsulation atm-snap;
vci 0.102;
inverse-arp;
family inet {
mtu 1950;
address 10.222.63.17/29;
}
}
philipp@M20-ISP-Lab> show configuration protocols ospf
area 0.0.0.0 {
interface at-1/0/0.102 {
priority 2;
retransmit-interval 4;
transit-delay 1;
hello-interval 10;
dead-interval 40;
neighbor 10.222.63.18;
poll-interval 120;
}
}
Thanks,
Philipp
--
Philipp Volkemer
Support Specialist Intelligent Internet NTS
- Nortel Networks Certified Specialist -
Nortel Networks Germany GmbH & Co. KG
Hahnstrasse 37-39
D-60528 Frankfurt am Main
Tel +49 69 6697-1046; ESN 581 1046
Fax +49 69 6697-1781; ESN 581 1781
Mobile +49 151 1265-1019; ESN 561 1019
philipp.volkemer@nortelnetworks.com
www.nortelnetworks.com
------_=_NextPart_001_01C284C7.64F9894E
Content-Type: text/html;
charset="iso-8859-1"
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">
<TITLE>OSPF between Passport 8600 and Juniper M20 via STM-1 ATM connection</TITLE>
<META content="MSHTML 6.00.2800.1106" name=GENERATOR></HEAD>
<BODY>
<DIV><SPAN class=337243212-05112002><FONT face=Arial color=#0000ff
size=2>Sorry,</FONT></SPAN></DIV>
<DIV><SPAN class=337243212-05112002><FONT face=Arial color=#0000ff
size=2></FONT></SPAN> </DIV>
<DIV><SPAN class=337243212-05112002><FONT face=Arial color=#0000ff size=2>forgot
the Passport section:</FONT></SPAN></DIV>
<DIV><SPAN class=337243212-05112002><FONT face=Arial color=#0000ff
size=2></FONT></SPAN> </DIV>
<DIV><SPAN class=337243212-05112002><FONT size=2> </DIV>
<DIV><FONT face=Arial color=#0000ff>atm 9/1 state enable</FONT></DIV>
<DIV><FONT face=Arial color=#0000ff>atm 9/1 framing-mode sdh</FONT></DIV>
<DIV><FONT face=Arial color=#0000ff>atm 9/1 clock-source loop-timed</FONT></DIV>
<DIV><FONT face=Arial color=#0000ff>atm 9/1 name "PP6K-ISP1-8/0"</FONT></DIV>
<DIV><FONT face=Arial color=#0000ff>atm 9/1 pvc create 0.102 name
"PP86-PP6K-VCC0.102"</FONT></DIV>
<DIV><FONT face=Arial color=#0000ff>atm 9/1 pvc f5-oam 0.102 enable send 5 retry
1 up 3 down 5 trap disable</FONT></DIV>
<DIV><FONT face=Arial color=#0000ff>atm 9/1 pvc 1483 ip create 102 0.102
10.222.63.17 disable 0</FONT></DIV>
<DIV><FONT face=Arial color=#0000ff>atm 9/2 state enable</FONT></DIV>
<DIV><FONT face=Arial color=#0000ff>atm 9/2 framing-mode sdh</FONT></DIV>
<DIV><FONT face=Arial color=#0000ff>atm 9/2 name "PP86-Shasta-12/2"</FONT></DIV>
<DIV><FONT face=Arial color=#0000ff>atm 9/2 pvc create 0.112 name
"PP86-Shasta-VCC0.112"</FONT></DIV>
<DIV><FONT face=Arial color=#0000ff>atm 9/2 pvc f5-oam 0.112 enable send 5 retry
1 up 3 down 5 trap disable</FONT></DIV>
<DIV><FONT face=Arial color=#0000ff>atm 9/2 pvc create 0.116 name
"PP86-Shasta-VCC0.116"</FONT></DIV>
<DIV><FONT face=Arial color=#0000ff>atm 9/2 pvc f5-oam 0.116 enable send 5 retry
1 up 3 down 5 trap disable</FONT></DIV>
<DIV><FONT face=Arial color=#0000ff>atm 9/2 pvc 1483 ip create 112 0.112
10.222.63.3 disable 0</FONT></DIV>
<DIV><FONT face=Arial color=#0000ff>atm 9/2 pvc 1483 ip create 116 0.116
10.222.63.11 disable 0</FONT></DIV>
<DIV><FONT face=Arial color=#0000ff>vlan 102 create byport 1 name
"Fiducia-PP-Juniper" color 1</FONT></DIV>
<DIV><FONT face=Arial color=#0000ff>vlan 102 ports remove
1/1-1/48,2/1-2/4,3/1-3/8,9/2-9/5 member portmember</FONT></DIV>
<DIV><FONT face=Arial color=#0000ff>vlan 102 ports add 9/1 member
portmember</FONT></DIV>
<DIV><FONT face=Arial color=#0000ff>vlan 102 ip create
10.222.63.18/255.255.255.248 mac_offset 6</FONT></DIV>
<DIV><FONT face=Arial color=#0000ff>vlan 102 ip ospf enable</FONT></DIV>
<DIV><FONT face=Arial color=#0000ff>vlan 112 create byipsubnet 1
10.222.63.0/255.255.255.248 name "PP86-Shasta-VCC0.112" color 32</FONT></DIV>
<DIV><FONT face=Arial color=#0000ff>vlan 112 ports remove
1/1-1/48,2/1-2/4,3/1-3/8,9/1,9/3-9/5 member portmember</FONT></DIV>
<DIV><FONT face=Arial color=#0000ff>vlan 112 ports add 9/2 member
portmember</FONT></DIV>
<DIV><FONT face=Arial color=#0000ff>vlan 112 ports add 9/2 member
static</FONT></DIV>
<DIV><FONT face=Arial color=#0000ff>vlan 112 ports remove
1/1-1/48,2/3-2/4,3/1-3/8,9/1,9/3-9/5 member portmember</FONT></DIV>
<DIV><FONT face=Arial color=#0000ff>vlan 112 ip create
10.222.63.4/255.255.255.248 mac_offset 7</FONT></DIV>
<DIV><FONT face=Arial color=#0000ff>vlan 116 create byipsubnet 1
10.222.63.8/255.255.255.248 name "PP86-Shasta-VCC0.116" color 31</FONT></DIV>
<DIV><FONT face=Arial color=#0000ff>vlan 116 ports remove
1/1-1/48,2/1-2/4,3/1-3/8,9/1,9/3-9/5 member portmember</FONT></DIV>
<DIV><FONT face=Arial color=#0000ff>vlan 116 ports add 9/2 member
portmember</FONT></DIV>
<DIV><FONT face=Arial color=#0000ff>vlan 116 ports add 9/2 member
static</FONT></DIV>
<DIV><FONT face=Arial color=#0000ff>vlan 116 ports remove
1/1-1/48,2/3-2/4,3/1-3/8,9/1,9/3-9/5 member portmember</FONT></DIV>
<DIV><FONT face=Arial color=#0000ff>vlan 116 ip create
10.222.63.12/255.255.255.248 mac_offset 8</FONT></DIV>
<DIV><FONT face=Arial><FONT
color=#0000ff></FONT></SPAN></FONT></FONT> </DIV>
<BLOCKQUOTE dir=ltr style="MARGIN-RIGHT: 0px">
<DIV class=OutlookMessageHeader dir=ltr align=left><FONT face=Tahoma
size=2>-----Original Message-----<BR><B>From:</B> Eduard Metz
[mailto:emetz@thrupoint.net]<BR><B>Sent:</B> Tuesday, November 05, 2002 1:30
PM<BR><B>To:</B> Volkemer, Philipp [HAHN:7000:EXCH];
juniper-nsp@puck.nether.net<BR><B>Subject:</B> RE: [j-nsp] OSPF between
Passport 8600 and Juniper M20 via STM-1 ATM connecti on<BR><BR></FONT></DIV>
<DIV><SPAN class=532112912-05112002><FONT face=Arial color=#0000ff
size=2>Could be the MTU - make sure OSPF parameters are equal on both sides.
Hard to guess without the Passport side of things ...</FONT></SPAN></DIV>
<DIV><SPAN class=532112912-05112002><FONT face=Arial color=#0000ff
size=2></FONT></SPAN> </DIV>
<DIV><SPAN class=532112912-05112002><FONT face=Arial color=#0000ff
size=2>cheers,</FONT></SPAN></DIV>
<DIV><SPAN class=532112912-05112002> <FONT face=Arial
color=#0000ff size=2>Eduard</FONT></SPAN></DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #0000ff 2px solid; MARGIN-RIGHT: 0px">
<DIV class=OutlookMessageHeader dir=ltr align=left><FONT face=Tahoma
size=2>-----Original Message-----<BR><B>From:</B>
juniper-nsp-admin@puck.nether.net
[mailto:juniper-nsp-admin@puck.nether.net]<B>On Behalf Of </B>Philipp
Volkemer<BR><B>Sent:</B> dinsdag 5 november 2002 12:54<BR><B>To:</B>
'juniper-nsp@puck.nether.net'<BR><B>Subject:</B> [j-nsp] OSPF between
Passport 8600 and Juniper M20 via STM-1 ATM connecti on<BR><BR></FONT></DIV>
<P><FONT size=2>Hi,</FONT> </P>
<P><FONT size=2>I'm trying to run OSPF between a Passport 8600 and a Juniper
M20 across an ATM STM-1 connection.</FONT> <BR><FONT size=2>The link is
working fine, I can ping, etc. but OSPF state will remain in "Exchange" and
not go into full?</FONT> </P>
<P><FONT size=2>I've never done this before so maybe it's a stupid question
but any hints are welcome.</FONT> </P>
<P><FONT size=2>Here's the config of the Juniper interface:</FONT> </P>
<P><FONT size=2>philipp@M20-ISP-Lab> show configuration interfaces
at-1/0/0 </FONT><BR><FONT size=2>description
STM-1-To-ISP4-4/1;</FONT> <BR><FONT size=2>clocking internal;</FONT>
<BR><FONT size=2>encapsulation atm-pvc;</FONT> <BR><FONT size=2>atm-options
{</FONT> <BR><FONT size=2> vpi 0 {</FONT> <BR><FONT
size=2> maximum-vcs 200;</FONT>
<BR><FONT size=2> }</FONT> <BR><FONT size=2>}</FONT>
<BR><FONT size=2>unit 102 {</FONT> <BR><FONT size=2>
description VCC0.102-to-ISP4/1;</FONT> <BR><FONT size=2>
encapsulation atm-snap;</FONT> <BR><FONT size=2> vci
0.102;</FONT> <BR><FONT size=2> inverse-arp;</FONT>
<BR><FONT size=2> family inet {</FONT> <BR><FONT
size=2> mtu 1950;</FONT> <BR><FONT
size=2> address
10.222.63.17/29;</FONT> <BR><FONT size=2> }</FONT>
<BR><FONT size=2>}</FONT> </P>
<P><FONT size=2>philipp@M20-ISP-Lab> show configuration protocols
ospf </FONT><BR><FONT size=2>area 0.0.0.0 {</FONT> <BR><FONT
size=2> interface at-1/0/0.102 {</FONT> <BR><FONT
size=2> priority 2;</FONT>
<BR><FONT size=2>
retransmit-interval 4;</FONT> <BR><FONT
size=2> transit-delay 1;</FONT>
<BR><FONT size=2> hello-interval
10;</FONT> <BR><FONT size=2>
dead-interval 40;</FONT> <BR><FONT
size=2> neighbor
10.222.63.18;</FONT> <BR><FONT
size=2> poll-interval 120;</FONT>
<BR><FONT size=2> }</FONT> <BR><FONT size=2>}</FONT>
</P><BR>
<P><FONT size=2>Thanks,</FONT> </P>
<P><FONT size=2>Philipp</FONT> </P><BR>
<P><FONT size=2>--</FONT> <BR><FONT size=2>Philipp Volkemer</FONT> <BR><FONT
size=2>Support Specialist Intelligent Internet NTS</FONT> <BR><FONT size=2>-
Nortel Networks Certified Specialist -</FONT> <BR><FONT size=2>Nortel
Networks Germany GmbH & Co. KG</FONT> <BR><FONT size=2>Hahnstrasse
37-39</FONT> <BR><FONT size=2>D-60528 Frankfurt am Main</FONT> <BR><FONT
size=2>Tel +49 69 6697-1046; ESN 581 1046</FONT> <BR><FONT size=2>Fax +49 69
6697-1781; ESN 581 1781</FONT> <BR><FONT size=2>Mobile +49 151 1265-1019;
ESN 561 1019</FONT> <BR><FONT
size=2>philipp.volkemer@nortelnetworks.com</FONT> <BR><FONT
size=2>www.nortelnetworks.com</FONT>
</P></BLOCKQUOTE></BLOCKQUOTE></BODY></HTML>
------_=_NextPart_001_01C284C7.64F9894E--