[j-nsp] filter to count http requests

[German Martinez]

I'd say that use destination-address you will be ablet to specify the
host.

For more information go to http://www.juniper.net and look for firewall
filters

Thanks
German


______________________________________________________________

"Peace cannot be kept by force.   It can only be achieved by
           understanding."  Albert Einstein.

---------------------------------------------------------------

On Mon, 18 Nov 2002, tchoel . wrote:

>
> hi,
>
> no infact, there is a large network connected to the upstream via filtered
> interface. I couldn't be able to unserstand why I can not count the network
> total request. I'm not an expert on tcp processes. I know that browsers
> utilize several (4 ?) tcp sessions to retrieve the requested url. Is that
> the reason filter fails for a network? Can you refer to me any source of
> information for that ?
> Thanks for your time.
>
> Regards,
> tchoel
>
>
>
>
>
> >From: German Martinez <gmartine@mafalda.opentransit.net>
> >To: "tchoel ." <tchoel@hotmail.com>
> >CC: <juniper-nsp@puck.nether.net>
> >Subject: Re: [j-nsp] filter to count http requests
> >Date: Mon, 18 Nov 2002 11:24:23 -0500 (EST)
> >
> >If there is just one host connected you you uplink, that filter will help
> >you counting what you are looking for.
> >
> >Thanks
> >german
> >
> >
> >______________________________________________________________
> >
> >"Peace cannot be kept by force.   It can only be achieved by
> >            understanding."  Albert Einstein.
> >
> >---------------------------------------------------------------
> >
> >On Mon, 18 Nov 2002, tchoel . wrote:
> >
> > > Hi,
> > >
> > > I'm trying to count HTTP requests forwarded to my uplink.I've written a
> > > filter given below and applied this to the uplink interface as output
> > > filter. Is this is a safe method to mesure http requests ?
> > >
> > > Regards,
> > > Tchoel
> > >
> > > firewall filter httpRequests {
> > >     term countHttp{
> > >          from {
> > >              protocol tcp;
> > >              port 80;
> > >              tcp-initial;
> > >          }
> > >          then{
> > >              count httpRequests;
> > >              accept;
> > >      }
> > >      term others{
> > >          then{
> > >               accept;
> > >      }
> > > }
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > _________________________________________________________________
> > > MSN 8 with e-mail virus protection service: 2 months FREE*
> > > http://join.msn.com/?page=features/virus
> > >
> > > _______________________________________________
> > > juniper-nsp mailing list juniper-nsp@puck.nether.net
> > > http://puck.nether.net/mailman/listinfo/juniper-nsp
> > >
> >
> >_______________________________________________
> >juniper-nsp mailing list juniper-nsp@puck.nether.net
> >http://puck.nether.net/mailman/listinfo/juniper-nsp
>
>
> _________________________________________________________________
> Protect your PC - get McAfee.com VirusScan Online
> http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp@puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp
>