[j-nsp] IPv6 firewall

[Stephen Stuart]

> And I think that routing is not my problem. The following
> figure is a part of my test network.
> 
>      =+======+=  =+======+=
>       | segA |    | segB |
>    Router_A   M-10    Router_B
> 
> My problem is that ping6 from Router_A to loopback I/F of
> Router_B, and from Router_B to loopback of Router_A, fail
> only after appling the filter to lo0.0 of M-10. Of course
> every router has route to segA, segB and loopback I/F of
> each other even after appling the filter.

You've got logging on both terms of the filter; what do the firewall
logs say?

Stephen