[j-nsp] import BGP routes in RIB

[Andrew Ramsey]

Chris,

Can you explain your application a little better.  For example, 2547
VPNs use BGP extended communities to import MP-BGP routes into a
particular RIB(s).  In fact, it does exactly what you describe below.
Is that what you want to do?  If not, what is it you want to do?

Thanks,
Andy

>-----Original Message-----
>From: Christian Malo [mailto:chris@fiberpimp.net]
>Sent: Thursday, September 05, 2002 4:09 PM
>To: Andrew Ramsey
>Cc: juniper-nsp@puck.nether.net
>Subject: RE: [j-nsp] import BGP routes in RIB
>
>
>try doing it with a policy.
>
>like putting only BGP routes with a certain community in the RIB.
>
>-chris
>
>On Thu, 5 Sep 2002, Andrew Ramsey wrote:
>
>> Chris,
>>
>> Try this...
>>
>>=20
>https://www.juniper.net/techpubs/software/junos54/swconfig54-ro
>uting/htm
>> l/bgp-config39.html#1016224
>>
>> Andy
>>
>> >-----Original Message-----
>> >From: Christian Malo [mailto:chris@fiberpimp.net]
>> >Sent: Thursday, September 05, 2002 1:56 PM
>> >To: juniper-nsp@puck.nether.net
>> >Subject: [j-nsp] import BGP routes in RIB
>> >
>> >
>> >
>> >Is it possible to import BGP routes into a newly created RIB ?
>> >
>> >
>> >static/ospf/isis can be done easily but I found no docs on how
>> >to import
>> >BGP routes in the new rib.
>> >
>> >
>> >any idea ?
>> >
>> >-chris
>> >
>> >_______________________________________________
>> >juniper-nsp mailing list juniper-nsp@puck.nether.net
>> >http://puck.nether.net/mailman/listinfo/juniper-nsp
>> >
>>
>
>