[j-nsp] import BGP routes in RIB

[Christian Malo]

I need to put iBGP routes in a RIB for a customer needing FBF.

-chris

On Thu, 5 Sep 2002, Andrew Ramsey wrote:

> Chris,
>
> Can you explain your application a little better.  For example, 2547
> VPNs use BGP extended communities to import MP-BGP routes into a
> particular RIB(s).  In fact, it does exactly what you describe below.
> Is that what you want to do?  If not, what is it you want to do?
>
> Thanks,
> Andy
>
> >-----Original Message-----
> >From: Christian Malo [mailto:chris@fiberpimp.net]
> >Sent: Thursday, September 05, 2002 4:09 PM
> >To: Andrew Ramsey
> >Cc: juniper-nsp@puck.nether.net
> >Subject: RE: [j-nsp] import BGP routes in RIB
> >
> >
> >try doing it with a policy.
> >
> >like putting only BGP routes with a certain community in the RIB.
> >
> >-chris
> >
> >On Thu, 5 Sep 2002, Andrew Ramsey wrote:
> >
> >> Chris,
> >>
> >> Try this...
> >>
> >>
> >https://www.juniper.net/techpubs/software/junos54/swconfig54-ro
> >uting/htm
> >> l/bgp-config39.html#1016224
> >>
> >> Andy
> >>
> >> >-----Original Message-----
> >> >From: Christian Malo [mailto:chris@fiberpimp.net]
> >> >Sent: Thursday, September 05, 2002 1:56 PM
> >> >To: juniper-nsp@puck.nether.net
> >> >Subject: [j-nsp] import BGP routes in RIB
> >> >
> >> >
> >> >
> >> >Is it possible to import BGP routes into a newly created RIB ?
> >> >
> >> >
> >> >static/ospf/isis can be done easily but I found no docs on how
> >> >to import
> >> >BGP routes in the new rib.
> >> >
> >> >
> >> >any idea ?
> >> >
> >> >-chris
> >> >
> >> >_______________________________________________
> >> >juniper-nsp mailing list juniper-nsp@puck.nether.net
> >> >http://puck.nether.net/mailman/listinfo/juniper-nsp
> >> >
> >>
> >
> >
>