[j-nsp] BGP disable/shutdown command

[Umar Ahmed]

In config mode ... try  :

deactivate protocols bgp group (group name) neighbor (neighbor address)


Umar.


-----Original Message-----
From: Link King [mailto:king at kinger.net]
Sent: 01 April 2003 15:29
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] BGP disable/shutdown command



I can see that there is a way to disable BGP entirely at the 'protocols
bgp' level but is there a similar functionality at the group and/or
neighbor level?  Something similiar to a 'neighbor 10.10.10.10 shutdown'
command on a Cisco?

Link King
king at kinger.net
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp


------------------------------------------------------------------------------------------
Equinox Converged Solutions Limited.
Tel: +44 (0)1252 405 600
http://www.equinoxsolutions.com

IMPORTANT NOTICE:
This message is intended solely for the use of the Individual or organisation to whom it is addressed. It may contain privileged or confidential information.  If you have received this message in error, please notify the originator immediately.
If you are not the intended recipient, you should not use, copy, alter, or disclose the contents of this message.  All information or opinions expressed in this message and/or any attachments are those of the author and are not necessarily those of Equinox Converged Solutions Limited.
Equinox Converged Solutions Limited accepts no responsibility  for loss or damage arising from its use, including damage from virus.
------------------------------------------------------------------------------------------