[j-nsp] Implementing Ethernet Aggregated Features

Richard A Steenbergen ras at e-gerbil.net
Thu Apr 3 13:44:45 EST 2003

On Thu, Apr 03, 2003 at 08:30:25PM +0200, Josef Buchsteiner wrote:
> At 08:23 PM 4/3/2003, Robert Viau wrote:
> >Is it normal to not be able to do this with fxp interfaces?
> >
> >I tried following the instructions at the link below, but the fxp 
> >interfaces
> >do not appear to support 'fastether-options'.  It would be nice to use an 
> >AE
> >interface for management as it would then provide layer 1 failover.
> what would be the gain if you have one link (fxp0) in an ethernet trunk ?

Perhaps he means over 2 RE's?

Richard A Steenbergen <ras at e-gerbil.net>       http://www.e-gerbil.net/ras
GPG Key ID: 0xF8B12CBC (7535 7F59 8204 ED1F CC1C 53AF 4C41 5ECA F8B1 2CBC)

More information about the juniper-nsp mailing list