[j-nsp] ssb error

[Guy Davies]

Contact J-TAC.  They'll help you (assuming you have a support contract ;-)
 
Regards,
 
Guy

-----Original Message-----
From: Aman Singh [mailto:asingh at grintek.com]
Sent: Friday, April 04, 2003 11:18 AM
To: Juniper discussion thread (E-mail)
Subject: [j-nsp] ssb error


hi all
i get this recurring error in my logs and while in the ssb.
please assist in a diagnosis .
 
[Apr  4 12:13:04.480 LOG: Err] PS: I2C error reading status, PS B (1)
[Apr  4 12:13:05.480 LOG: Err] PCF8584(RD): target ack timeout
[Apr  4 12:13:05.480 LOG: Err] PCF8584(RD): (i2c_s1=0x08, group=0x3,
device=0x20
 
what's the cause of this ?
 
the only funny  on this box is that a new dc power supply was installed and
comes up with a temp sensor alarm...
 
regards
Aman
 

 

 


**********************************************************************
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please notify
the system manager.

This footnote also confirms that this email message has been swept
by Sophos AntiVirus Interface for the presence of computer viruses.

www.sophos.com
**********************************************************************