[j-nsp] VRRP

[Todd Regonini]

Michael,
"accept data" enables the VRRP router to respond to pings to the Virtual
IP address.  By default, in accordance with the RFC, the VRRP router is
not supposed to respond to pings unless the actual interface address
matches the VIP (if I remember correctly).  However, HSRP routers WILL
respond to pings directed at the VIP.  This knob allows you to mimic
that behavior.  It will work fine without it.  Hope this helps.

Todd

-----Original Message-----
From: Michael [mailto:wsf at vodatelsys.com]
Sent: Sunday, April 06, 2003 7:39 PM
To: juniper-nsp at puck.nether.net
Subject: [j-nsp] VRRP


Hi,

in vrrp configuration.is it also necessary to put "accept data".
does it work without "accept data"?
-- 
Michael <wsf at vodatelsys.com>

_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp