[j-nsp] BGP config ?

[Gary Tate]

Michael,

Just as a clarification.  There is no direct equivalent of the network 
command.

The cisco network command allows you to configure bgp to originate a 
bgp route if that route is known on the box from another source 
(Direct, static, dynamic etc).

In JunOS you can do the same with bgp export policies.  If you wish to 
create a new route then you use the static, aggregate and generate 
routing-options.

Gary

On Monday, Apr 28, 2003, at 13:42 US/Pacific, Gary Tate wrote:

> There are a number of ways to add routing entries: static, generate, 
> aggregate the choice is dependent on the type of route you are trying 
> to create and for what purpose.
>
> Once the static routes, aggregates routes, generate routes are created 
> under routing-options you then need to export them using bgp export 
> policies.
>
> Let me know if you need some examples or further help.
>
> Gary
>
> On Monday, Apr 28, 2003, at 12:59 US/Pacific, Wilson, Michael wrote:
>
>> Can somone tell me what the equivalent of a Cisco network statement 
>> would be
>> in Junos?  Would this be done in the [edit routing-options generate]
>> section?  Thanks.
>>
>> Michael Wilson
>> ----------------------
>> Data Network Engineering
>> mkwilson at uslec.com
>> Desk: 704-319-1983
>> Pager: 866-410-4784
>>
>>
>> _______________________________________________
>> juniper-nsp mailing list juniper-nsp at puck.nether.net
>> http://puck.nether.net/mailman/listinfo/juniper-nsp
>>
>