[j-nsp] ntp status

Umar.Ahmed at equinoxsolutions.com Umar.Ahmed at equinoxsolutions.com
Tue Aug 26 12:27:05 EDT 2003


Yu-lin,
 
try this :
 
start shell
su
/usr/sbin/xntpd
exit
exit
 
This will start ntp.
 
After starting NTP, you will see something like this (2 entries):
 
Juniper> show system processes | match ntp
 2665  ??  S<     0:20.93 /usr/sbin/xntpd -N (ntpd)
 2674  ??  S      0:01.01 /usr/sbin/tnp.sntpd -N
 
Regards,
 
Umar.

-----Original Message-----
From: Yu-lin Chang [mailto:ylchang at ascc.net]
Sent: 25 August 2003 06:33
To: juniper-nsp at puck.nether.net; juniper at groupstudy.com
Subject: Re: [j-nsp] ntp status


 
I don't know if your problem is PR35418.
 
you can try to bind a valid IP on your fxp.0 interface 
and run "show ntp associations" again.
 
 
----- Original Message ----- 
From: Yuki Arif  <mailto:yuki.arif at ericsson.com> (EI/EID) 
To: juniper-nsp at puck.nether.net <mailto:juniper-nsp at puck.nether.net>  ;
juniper at groupstudy.com <mailto:juniper at groupstudy.com>  
Sent: Monday, August 25, 2003 11:58 AM
Subject: [j-nsp] ntp status

Hello,
 
I have a problem when I enter "show ntp status" and "show ntp associations"
in my M20 router.
 
I got /usr/sbin/ntpq "connection refused".
 
When i go to unix shell and type "ntpq -p" I got "conection refused" as
well.
 
When i snooped in the ntp server, there is continues (in interval) request
from my M20 and there is a reply from my ntp server.
 
When I trace using my firewall log, the ntp session is accepted by one of my
rule.
 
Do you know what's wrong with my M20 ?
 
Do you have suggestions how to fix it ?
 
Thanks.
 
Best Regards
 
 
Yuki



  _____  




_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp




------------------------------------------------------------------------------------------
Equinox Converged Solutions Limited.
Tel: +44 (0)1252 405 600
http://www.equinoxsolutions.com

IMPORTANT NOTICE:
This message is intended solely for the use of the Individual or organisation to whom it is addressed. It may contain privileged or confidential information.  If you have received this message in error, please notify the originator immediately.
If you are not the intended recipient, you should not use, copy, alter, or disclose the contents of this message.  All information or opinions expressed in this message and/or any attachments are those of the author and are not necessarily those of Equinox Converged Solutions Limited.
Equinox Converged Solutions Limited accepts no responsibility  for loss or damage arising from its use, including damage from virus.
------------------------------------------------------------------------------------------

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/juniper-nsp/attachments/20030826/ab2d8d7f/attachment.htm


More information about the juniper-nsp mailing list