[j-nsp] Big Size Packets on DS3

[Kashif.Khawaja at Broadwing.com]

> > trying to get to the default MTU. Getting bogged down at about 4445 
> > bytes. Tried another channel on this CHOC-12 to no avail.
> 
>   can you illustrate/demonstrate how you verified the MTU 
> settings and also
>   the output of the interface in question ?
> 
>   thanks
>   Josef
> 

Is there any other way definite way apart from this?

> show interfaces t3-0/3/0:4 
Physical interface: t3-0/3/0:4, Enabled, Physical link is Down
  Interface index: 17, SNMP ifIndex: 43
  Description: XXXX
  Link-level type: Cisco-HDLC, MTU: 4474, SONET mode, Speed: T3, Loopback: None, SONET
Loopback: None, FCS: 32, Mode: C/Bit parity
  Device flags   : Present Running Down
 +++The information transmitted is intended only for the person or entity to which it is
addressed and may contain confidential and/or privileged material.  Any review,
retransmission, dissemination or other use of, or taking of any action in reliance upon,
this information by persons or entities other than the intended recipient is prohibited.
If you received this in error, please contact the sender and destroy any copies of this
document.+++