[j-nsp] autonomous-system N loops L / local-as N loops L

[Gary Tate]

Please report it to the JTAC.  I have just tested this configuration 
and saw no rpd restart.

me at router# run monitor start messages

[edit]
me at router# set routing-options autonomous-system 200 loops 2

[edit]
me at router# commit
Dec 11 15:03:37  router mgd[25131]: UI_COMMIT: User 'me' performed 
commit: no
comment
commit complete

[edit]
me at router#

Gary

On Dec 11, 2003, at 2:52 PM, Jeff Wheeler wrote:

> Is anyone using routing-options autonomous-system N loops L on any of
> their routers? I am experiencing a problem that I believe is a bug with
> this configuration. When using '2' or '1' as the value for L, config
> commits cause rpd to choke and restart. The following is syslogged..:
>
> Dec 11 14:47:49  bordercore3.chcgil02 mgd[4630]: UI_COMMIT: User 'root'
> performed commit: no comment
> Dec 11 14:47:50  bordercore3.chcgil02 rpd[4675]: 
> UI_CONFIGURATION_ERROR:
> Process: rpd, path: <none>, statement: <none>, Invalid loop count
> configured
> Dec 11 14:47:50  bordercore3.chcgil02 rpd[4675]: RPD_EXIT: Exit
> rpd[4675] version 6.1R2.2 built by builder on 2003-11-21 23:53:00 UTC,
> caller 809f3cb
> Dec 11 14:47:50  bordercore3.chcgil02 init: routing (PID 4675) exited
> with status=0 Normal Exit
> Dec 11 14:47:50  bordercore3.chcgil02 init: routing (PID 4928) started
>
> Obviously the rpd restart causes my routing protocols to restart, which
> flaps eBGP peers and causes havoc on the IGP as well. The only cure 
> I've
> found was to simply remove the loops statement (which was a challenge 
> in
> and of itself, thanks, CLI!). This complicates my configuration, as I
> really do want to receive (some) routes over eBGP sessions containing 
> my
> own as number one or more times! :-(
>
> -- 
> Jeff at Reflected Networks
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp
>