[j-nsp] autonomous-system N loops L / local-as N loops L

[Pedro Roque Marques]

gtate at juniper.net (Gary Tate) writes:

Gary,
This is probably same as 41157.

The error message indicates that Jeff is attempting to configure the
same AS w/ two different loops settings. For instance top level as 200
and "local-as 200 loops 10".

This configuration should be rejected.

  Pedro.

> Please report it to the JTAC.  I have just tested this configuration 
> and saw no rpd restart.
> 
> me at router# run monitor start messages
> 
> [edit]
> me at router# set routing-options autonomous-system 200 loops 2
> 
> [edit]
> me at router# commit
> Dec 11 15:03:37  router mgd[25131]: UI_COMMIT: User 'me' performed 
> commit: no
> comment
> commit complete
> 
> [edit]
> me at router#
> 
> Gary
> 
> On Dec 11, 2003, at 2:52 PM, Jeff Wheeler wrote:
> 
> > Is anyone using routing-options autonomous-system N loops L on any of
> > their routers? I am experiencing a problem that I believe is a bug with
> > this configuration. When using '2' or '1' as the value for L, config
> > commits cause rpd to choke and restart. The following is syslogged..:
> >
> > Dec 11 14:47:49  bordercore3.chcgil02 mgd[4630]: UI_COMMIT: User 'root'
> > performed commit: no comment
> > Dec 11 14:47:50  bordercore3.chcgil02 rpd[4675]: 
> > UI_CONFIGURATION_ERROR:
> > Process: rpd, path: <none>, statement: <none>, Invalid loop count
> > configured
> > Dec 11 14:47:50  bordercore3.chcgil02 rpd[4675]: RPD_EXIT: Exit
> > rpd[4675] version 6.1R2.2 built by builder on 2003-11-21 23:53:00 UTC,
> > caller 809f3cb
> > Dec 11 14:47:50  bordercore3.chcgil02 init: routing (PID 4675) exited
> > with status=0 Normal Exit
> > Dec 11 14:47:50  bordercore3.chcgil02 init: routing (PID 4928) started
> >
> > Obviously the rpd restart causes my routing protocols to restart, which
> > flaps eBGP peers and causes havoc on the IGP as well. The only cure 
> > I've
> > found was to simply remove the loops statement (which was a challenge 
> > in
> > and of itself, thanks, CLI!). This complicates my configuration, as I
> > really do want to receive (some) routes over eBGP sessions containing 
> > my
> > own as number one or more times! :-(
> >
> > -- 
> > Jeff at Reflected Networks
> >
> > _______________________________________________
> > juniper-nsp mailing list juniper-nsp at puck.nether.net
> > http://puck.nether.net/mailman/listinfo/juniper-nsp
> >
> 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp