[j-nsp] Rpd_os_memhigh

[Richmond, Jeff (ELI)]

Also, for taking a look at memory consumption, the following are usually
helpful:

show task memory detail
show task memory history

or you could just drop to shell and run top...

-Jeff 

-----Original Message-----
From: Jared Mauch [mailto:jared at puck.nether.net]
Sent: Tuesday, December 23, 2003 6:16 PM
To: Kashif.Khawaja at Broadwing.com
Cc: juniper-nsp at puck.nether.net
Subject: Re: [j-nsp] Rpd_os_memhigh


On Tue, Dec 23, 2003 at 08:07:33PM -0600, Kashif.Khawaja at Broadwing.com
wrote:
> Hi Everyone,
> 
> rpd[606]: RPD_OS_MEMHIGH: using 211775 kB of memory, 103 percent of
available
> 
> Getting this message on my router constantly. Obviously I have pushed
things over the
> edge. Can somebody make  suggestions (on/off list) about how to check and
see what
> processes have devoured all the memory? My guess of course is the bgp
sessions I have on
> the router. Thanks in advance!
> 

	you should upgrade to 768m if at all possible.

	it looks like you only have 256m or so.

	you should also contact Juniper so they can look at it
to insure it's not a unknown memory leak as well.

	My suggestion: upgrade or reboot (or just restart rpd) when
possible.

	- Jared


-- 
Jared Mauch  | pgp key available via finger from jared at puck.nether.net
clue++;      | http://puck.nether.net/~jared/  My statements are only mine.
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp