[j-nsp] Operating Temperature
Richard A Steenbergen
ras at e-gerbil.net
Thu Jul 17 03:10:18 EDT 2003
On Wed, Jul 16, 2003 at 10:36:10PM -0700, jnpr cisco wrote:
> We have M-160 with 1-3 FPC's only,
> and it seems the FPC's run in High 40's n the fans kick up on high speed preety often....
> Intutively this doesnt seem to good,
> we were advised to clear up Air-Filters
> however , doesnt seeem to help much.
>From my experience, M160's tend to run much much hotter than lower M
series routers, even with small configs.
Class Item Status Measurement
Power PEM 0 OK
PEM 1 OK
Temp PCG 0 OK 40 degrees C / 104 degrees F
PCG 1 OK 42 degrees C / 107 degrees F
Routing Engine 0 OK 28 degrees C / 82 degrees F
MCS 0 OK 43 degrees C / 109 degrees F
SFM 0 SPP OK 41 degrees C / 105 degrees F
SFM 0 SPR OK 45 degrees C / 113 degrees F
SFM 1 SPP OK 45 degrees C / 113 degrees F
SFM 1 SPR OK 46 degrees C / 114 degrees F
SFM 2 SPP OK 44 degrees C / 111 degrees F
SFM 2 SPR OK 47 degrees C / 116 degrees F
SFM 3 SPP OK 44 degrees C / 111 degrees F
SFM 3 SPR OK 43 degrees C / 109 degrees F
FPC 0 OK 38 degrees C / 100 degrees F
FPC 1 OK 41 degrees C / 105 degrees F
FPC 2 OK 44 degrees C / 111 degrees F
FPM CMB OK 24 degrees C / 75 degrees F
FPM Display OK 26 degrees C / 78 degrees F
Fans Rear Bottom Blower OK Spinning at normal speed
Rear Top Blower OK Spinning at normal speed
Front Top Blower OK Spinning at normal speed
Fan Tray Rear Left OK Spinning at normal speed
Fan Tray Rear Right OK Spinning at normal speed
Fan Tray Front Left OK Spinning at normal speed
Fan Tray Front Right OK Spinning at normal speed
Misc CIP OK
--
Richard A Steenbergen <ras at e-gerbil.net> http://www.e-gerbil.net/ras
GPG Key ID: 0xF8B12CBC (7535 7F59 8204 ED1F CC1C 53AF 4C41 5ECA F8B1 2CBC)
More information about the juniper-nsp
mailing list