[j-nsp] 5.7R2.4: feb nh_ifl_decrement_mcast_count log messages

[Yu-lin Chang]

Hi Matti,

I got the same messages on my Juniper.
I asked this to Juniper Engineer, he told me that these 
messages are only for informational and will not hurt 
the router.

after these few busy days, I will ask him the reason that
introduce those messages.


BR,
Yu-lin Chang
--

----- Original Message ----- 
From: "Matti Saarinen" <mjs at cc.tut.fi>
To: <juniper-nsp at puck.nether.net>
Sent: Thursday, June 26, 2003 1:49 PM
Subject: [j-nsp] 5.7R2.4: feb nh_ifl_decrement_mcast_count log messages



I just upgraded our M10 to JUNOS 5.7R2.4. After the upgrade, I began
to see the following log messages.

feb nh_ifl_increment_mcast_count: no IPv4 family on ifl 0 for list 33 
feb nh_ifl_decrement_mcast_count: no IPv4 family on ifl 0 for list 33 
feb nh_ifl_increment_mcast_count: no IPv4 family on ifl 0 for list 33 
feb nh_ifl_decrement_mcast_count: no IPv4 family on ifl 0 for list 32 
feb nh_ifl_increment_mcast_count: no IPv4 family on ifl 0 for list 34 

What is causing these? And what do these entries mean in a first
place?

I couldn't find any information abot this with Google. Juniper's web
site's search engine didn't give any information either (well, it
doesn't allow me to search Customer Support Center section even though
I have access to CSC (except the SW downloads))

Cheers,

-- 
- Matti -
_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp