[j-nsp] PIM-SM / registor / ISIS

[Leonard Giuliano]

Bert- do you have a unicast route for the RP address?  Can you ping it?


-Lenny

On Tue, 4 Mar 2003 bert.todts at alcatel.be wrote:

-)
-) Did anybody encountered following problem ?
-)
-) -I am using Junos 5.5R1.2 and I am SDR  and not RP for a PIM_SM domain.
-) -I was using ospf as IGP and every things worked fine.
-) -The RP is static configured.
-) -Now I am switched to ISIS and  I am not sending registor msg's and the
-) multicast route stays as mdiscard in the routing table.
-) -show multicast route shows  IfMismatch increasing.
-) -Source @ip is direct connected.
-) -Rp @IP is known in routing table.
-)
-) Bert
-)
-) run show multicast route extensive
-)  Family: INET
-) Group           Source prefix     Act Pru NHid  Packets    IfMismatch
-) Timeout
-) 227.1.1.1       70.70.70.2     /32 A   P  0     0
-) 9450       170
-)     Upstream interface: local
-)     Session name: Unknown
-)     Forwarding rate: 0 kBps (0 pps)
-)
-) inet.1: 1 destinations, 1 routes (1 active, 0 holddown, 0 hidden)
-)
-)
-) 227.1.1.1.70.70.70.2/64 (1 entry, 1 announced)
-) TSI:
-) KRT in-kernel 227.1.1.1.70.70.70.2/64 -> {mdiscard}
-)         *PIM    Preference: 105
-)                 Next hop type: Multicast (IPv4)
-)                 State: <Active Int>
-)                 Age: 3:53
-)                 Task: PIM.master
-)                 Announcement bits (1): 0-KRT
-)
-)
-) _______________________________________________
-) juniper-nsp mailing list juniper-nsp at puck.nether.net
-) http://puck.nether.net/mailman/listinfo/juniper-nsp
-)