[j-nsp] error: the routing subsystem is not running
Ajay Saini
sainiajay at hotmail.com
Fri Mar 7 12:48:56 EST 2003
Could anyone please tell me why am getting the following error?
aj at Karlstadd-re0> show route
error: the routing subsystem is not running
Is there any process I should look for? The show chassis routing-engine output is:
Routing Engine status:
Slot 0:
Current state Master
Election priority Master (default)
Temperature 32 degrees C / 89 degrees F
DRAM 768 MB
Memory utilization 18 percent
CPU utilization:
User 1 percent
Background 0 percent
Kernel 0 percent
Interrupt 76 percent
Idle 22 percent
Model RE-2.0
Serial ID bf000007c78c6201
Start time 2003-01-13 16:57:25 CET
Uptime 52 days, 19 hours, 45 minutes, 33 seconds
Load averages: 1 minute 5 minute 15 minute
4.89 4.87 4.84
Routing Engine status:
Slot 1:
Current state Backup
Election priority Backup (default)
Temperature 25 degrees C / 77 degrees F
DRAM 768 MB
Memory utilization 16 percent
CPU utilization:
User 0 percent
Background 0 percent
Kernel 0 percent
Interrupt 0 percent
Idle 100 percent
Model RE-2.0
Serial ID 5b0000078e2efb01
Start time 2003-01-13 16:56:48 CET
Uptime 52 days, 19 hours, 43 minutes, 40 seconds
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://puck.nether.net/pipermail/juniper-nsp/attachments/20030307/ff5e96dc/attachment.htm
More information about the juniper-nsp
mailing list