[j-nsp] Implementing Ethernet Aggregated Features

Harshit Kumar harshit at juniper.net
Fri Mar 21 12:09:20 EST 2003


Hope this link helps ....

http://www.juniper.net/techpubs/software/junos/junos56/swconfig56-interf
aces/html/interfaces-ethernet-config34.html#1014780

--harshit

-----Original Message-----
From: hhadiwinoto at hotpop.com [mailto:hhadiwinoto at hotpop.com] 
Sent: Thursday, March 20, 2003 9:04 PM
To: juniper-nsp at puck.nether.net; juniper at groupstudy.com
Subject: [j-nsp] Implementing Ethernet Aggregated Features


Hi,


I have some questions regarding to ethernet aggregated features
(802.3ad)
on M-series,
1. Do I need to invest a special PIC for implementing fast ethernet
aggregated features on M-series ?
2. can Juniper implementation for 802.3ad do load balances traffic
(unicast
traffic) and redudancy/fail-over (unicast traffic) as well ?


-----------                 ------------
|   M5    |                 |    M5    |
-----------                 ------------
  |  | FE		       |  |  FE		
  |  |                         |  |
-------------      FE      -------------
| switch    | -------------|  switch   |
-------------              -------------
  |  FE
  |
-------------
|   M5      |
-------------

any helps would be apreciated.

thanks & regards
hendro


--------------------------------------------------------------------
mail2web - Check your email from the web at
http://mail2web.com/ .



_______________________________________________
juniper-nsp mailing list juniper-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/juniper-nsp



More information about the juniper-nsp mailing list