[j-nsp] router load

[Brandon Ingles]

I cant find one.  A colleague here pointed me to the following link:

http://networking.ringofsaturn.com/Cisco/ciscojuniper.php


Which essentially shows that "show system processes" is the equivalent to
"show proc cpu".  Maybe there is some super secret uber command embedded
somewhere?  "show chassis routing-engine" doesnt seem to be what your
looking for either.




On Mon, 3 Nov 2003, David Brazewell wrote:

> Hi
>
> Does anyone know if there is a junos equivalent command for the cisco ios
> "show processes cpu" command?
>
> Ive seen the "show system processes extensive" output but it doesnt break
> down the rpd process so all you know is that your routing engine is using up
> your cpu but you dont know which part of the rpd process (bgp, ospf etc) is
> actually using what.
>
>
> thanks
>
> david
>
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp
>

Brandon Ingles
Internet Operations Engineer
Global Crossing NCC
ncc at gblx.net