[j-nsp] autonomous-system loop

Wayne E. Bouchard web at typo.org
Mon Nov 17 13:46:15 EST 2003


Please not that if you use the as-override, you're not protected on
your other links. You'll probably want to set up an as-path filter to
make sure you don't receive your own routes except from those places
where you INTENT to receive them. (prefix filter might even be better
so you can only accept the specific instances you're after.)

On Mon, Nov 17, 2003 at 10:29:42AM -0800, Pedro Roque Marques wrote:
> jantocin at datacomm.co.id (Janto Cin) writes:
> 
> > Hi All,
> > 
> > I've topology like below:
> > 
> > AS1----AS2(M10)-----vrf1 AS3 (MPLS Backbone) vrf2----AS2----AS4
> > 
> > Currently I'm configuring M10 in AS2.
> > Is it recommended it this situation to use "autonomous-system loop" in 
> > M10 or we have another solution for this?
> > 
> 
> as-override.
> 
>   Pedro.
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/juniper-nsp

---
Wayne Bouchard
web at typo.org
Network Dude
http://www.typo.org/~web/


More information about the juniper-nsp mailing list