[j-nsp] flow export with an Adaptive Services PIC

[Jay Ford]

On Fri, 10 Oct 2003, Dmitri Kalintsev wrote:
> You may want to check out "JunOS feature guide" in the JunOS documentation
> section. It has got reasonably nice description of what you're after.

Yeah, I've read that, & all the other pertinent documentation I can find.
I think I have it configured per the documentation, but I get no flow
reports.  The other symptoms are:
   o  sp-2/2/0.0 is always down
   o  the "Application" LED on the ASP has been off every time I've looked
   o  the "sampled" log contains many instances like:
         Oct 10 08:44:51 Deleted 0 route records from prev incarnation
         Oct 10 08:44:51 MPIC: skipping rr/as export; no MPIC clients
   o  the "fsad.trace" log contains many instances like:
         Oct 10 08:44:51 Received request from 10.0.0.50:14356
         Oct 10 08:44:51 Port Assigned=16651  Slot assigned=1
   o  the "irsd.trace" log contains many instances like:
         Oct 10 08:44:49 Assigned IP addr 10.0.0.50 to sp-2/2/0

What are the addresses on sp-2/2/0.0 & sp-2/2/0.16383 for?  I don't get it.

My Juniper SE is working on this, too.  I'm thinking that looking at the
config of a real working box will help me figure out what I have configured
wrong.

________________________________________________________________________
Jay Ford, Network Engineering Group, Information Technology Services
University of Iowa, Iowa City, IA 52242
email: jay-ford at uiowa.edu, phone: 319-335-5555, fax: 319-335-2951