[j-nsp] multicast on M20
Anouk Rocher
anouk at ureach.com
Thu Oct 23 21:18:17 EDT 2003
Harry,
Your reply helps a lot. Thanks!
Anouk.
________________________________________________
Get your own "800" number
Voicemail, fax, email, and a lot more
http://www.ureach.com/reg/tag
---- On Thu, 23 Oct 2003, harry (harry at juniper.net) wrote:
> Because PIM sparse mode is based on an explicit join model the
lack of a S,G
> entry indicates the lack of join state; there is no need to
forward such
> traffic because evidently no one is interested in receiving
it.
>
> In a sparse topology traffic only flows when S,G or *,G joins
are sent
> towards the source or RP respectively.
>
> To my knowledge only multicast traffic that is originated by
or destined to
> the RE is processed in SW on the RE. The Tunnel PIC handles
PIM register
> encapsulation in HW.
>
> HTHs.
More information about the juniper-nsp
mailing list