[j-nsp] type 1 or type 2 slot???

[harry]

There are different RE models, but I have not heard the term "slot" used
in conjunction with them.

The RE1 originally shipped with the M40. But, the M40 also supports
"special" LS-12- equipped versions of the RE2 and RE3 as well. 

The current RE version for the M40 is the RE-M40-600-2048. This is an
RE3 (600 MHz with 2 GM ram) that has the M40's "special" LS-120
removable drive.

http://www.juniper.net/products/ip_infrastructure/m_series/100042.html

I do not suppose the reseller is referring to a PCMCIA Type I vs Type II
slot, as the M40 RE does not have a PCMCIA slot.

HTHs



> -----Original Message-----
> From: juniper-nsp-bounces at puck.nether.net 
> [mailto:juniper-nsp-bounces at puck.nether.net] On Behalf Of 
> Jeff Szczerbinski
> Sent: Friday, September 19, 2003 3:02 PM
> To: juniper-nsp at puck.nether.net
> Subject: [j-nsp] type 1 or type 2 slot???
> 
> 
> HI,
> I was talking to my reseller about uprading our M40
> with re-233-256. He mentioned I would need to know
> what type of RE slot I have. He mentioned Type 1 or
> Type 2 slots.  I haven't seen that term anywhere and
> was wondering if anyone knew what he was talking about
> and could explain. 
> 
> tks
> z
> 
> 
> =====
> Jeff Szczerbinski, CCIE #4052
> ---------------------------------------------------------
> jeff at themtntop.com                 aol IM:  jszczerb
> direct: 262-673-6496                fax:   978-477-0327
> cell:   414-350-8658          mobile:  z.epage at themtntop.com
> UK cell(from us): 011-44-7817 055131 (from uk) 07817 055131 
> _______________________________________________
> juniper-nsp mailing list juniper-nsp at puck.nether.net 
> http://puck.nether.net/mailman/listinfo/junipe> r-nsp
>