[j-nsp] ISIS overload bit settings

[Umar.Ahmed at equinoxsolutions.com]

Hi all,

Just trawled through the Juniper website trying to find out if JunOS
supports anything similar to the "on-startup" or "wait-for-bgp" command.
This makes IS-IS wait for BGP to converge before clearing the overload bit.

Your comments would be appreciated.

Thanks.

Umar.


------------------------------------------------------------------------------------------
Equinox Converged Solutions Limited.
Tel: +44 (0)1252 405 600
http://www.equinoxsolutions.com

IMPORTANT NOTICE:
This message is intended solely for the use of the Individual or organisation to whom it is addressed. It may contain privileged or confidential information.  If you have received this message in error, please notify the originator immediately.
If you are not the intended recipient, you should not use, copy, alter, or disclose the contents of this message.  All information or opinions expressed in this message and/or any attachments are those of the author and are not necessarily those of Equinox Converged Solutions Limited.
Equinox Converged Solutions Limited accepts no responsibility  for loss or damage arising from its use, including damage from virus.
------------------------------------------------------------------------------------------